:D He came out this morning & found some wiring behind the thermostat loose on the RH lead. Heat working fine now. Still want to replace that high & low 3" dual thermal disc limit switch soon when I can find the one that matches the one in my unit. Thank's for your help. Still have to f...

Thank's Dale! I will get back tommorrow with then pics if they will upload to here. I always have the problem geting pics accepted from the wrong format size. I was trying to remember what Robert asked me to do by jumping two of the 3 wires to see if the fan comes on & the Gas valve clicks. My a...

I assume sooner or later someone will read this about my progress so I wanted you to knw where i'm at. My a/c heat repairman friend came out & replaced the motor & left me standing while I found out afetr he left the 24volt gas vale regulator would not kick in but heard the clicking at the n...

Any one know how I can test & ohm out the 3" thermal disc fan limit switch after I replace the motor? Thank's! Thought maybe the fan being wired to high rpm all the time could be causing the fan to shut off too soon once it cools down too fast & once the echanger has heated up. The echa...

Fighting with the cage to come off the motor shaft & won't budge.
Cage is new & hasn't been on it that long.
Tried wooden block & hammer.
I just gave up.

Just purchased another new AOSmith FDL6002A 3/4 -1/5 hp motor to go into this furnace. I'm wanting to rewire the motor to slow it down to a 1/3 hp so the heater chamber will stop kicking off so soon once the heat exchanger heats up. The motor thats in it now is a WhiteOcean 3/4 hp & is blowing t...

Sorry!
But I don't see what that has anything to do with my issue.
Besides I have no idea what your getting at anyway.
Thank's

:D Thank's DaleM! It might have done something cause the blower does stay running when it's in the off position. Didn't smell anything burning as such though. Well! At least it stills turns off when I either turn it off at the thermostat or set it to a higher temp to turn off the a/c. Have to remove...

Yes! And that's what my Wife want's me NOT TO DO! Tear up the paneling.

Thank's Moble68!
I'll check to see if it has one.
The lower devider shelf board inside the cabinet has almost rotted away.

Trying to edit the image to here.

:D Thank's JD! The cabinets does have paneling around the outside portion on the living room side & cabinets doors around the inside area on the kitchen side. It warps around & ends at some bookshelf's in the living room area. The stove is at the other end in a pocket area. Yes! It does have...

:( I was cleaning the dust off the back of the blower unit fan motor when the relays in the box tried to kick on but I had the main 3 way rocker fan switch in the off position. Now the switch has no affect on turning it off & on even when the a/c is running. While the fan was running I tried it ...

Thank's Greg!
Will do!

Thank's Greg! I'll see what it will take to remove the counter. Hope I don't have to completely tear it apart. Now where did I put that recipicating saw? Not that good at it. Wife would be so mad! I do have a Windows program & also my Kodak upload software where I can upload all my pics by defau...