Will this T=Stat (Thermostat with blower control.Thermostat with blower timer. Perfect for circulating heat from pellet stoves, wood stoves, solar air heaters and other. $55.95 ea.)
Work with a Coleman EB20B?

Have you ever noticed sometimes when you get to close to the problem you can over look the obvious? I thought I would check the voltage to the t stat. I can not see any voltage reaching the t stat. From the transformer side going to the t stat I have 24 volts ac. The other side of the transformer st...

I have replaced both Sequencer # 3120A3571, Blower Relay # 3110 = 3301. But Still the fan blows constantly and no hot air. I did note the air got warmer than cold. Would a bad t stat cause this? If so can I jump the red wire and the ? wire to make it blow heat and tell me if the t stat is bad?

I have ordered both from you. And I await delivery. But to answer your question that you ask at the bottom of your reply.
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?

I am both, just depends on the day. lol

1 of the power feeds to the heater coils reads 90 volts, but if I take the wire off going to the fan relay all read 120 volts. Are both load outs on transformer 3300-3861 suppose to be 24 volts? Mine are not, only 1 is the other is 0.5 volts. I now really feel like a dog chasing its tail. I have no ...

with or without power terminals 5 & 6 are open on the fan relay part #3110-3301, which makes me further think the fan relay is bad.

I took the fan relay cover off and noticed the contacts are worn and the spring is very lose, makes me think it is simply worn out. Should it not kinda snap back and forth?

I have a Coleman EB20B, this unit came with my used double wide. At first when I turned the power on it would do nothing. I do have a wiring diagram and soon found someone had moved a lot of wires around. mostly on the heating elements. I put the wires back to where the diagram said they should be t...