I dont know guys.. I checked everything and so far it checks out. been running fine since last post... if I have any changes ill report

Sorry Fellas been busy... ill check it out in a couple of days... will post back...

thanks alot guys ill look into it and post my findings!!!!

the furnace is short cycleing and blowing cold. Basically the blower would blow mostly on and off after a heating. sometimes it would run at random times too with no heat before I cleaned the board. Now since I cleaned the board it seems to only blow intermittant two or three times after it has fini...

The blue wire is actually in place of the white wire from the thermo to the controller. So I think im good there other than a difference in colors, but i can change that no prob. I couldn't honestly tell you if the jumpers are in the right place now or not. ive never compared it to others ive replac...

Thanks for the reply gordo
so if I understand correctly t the condensor...r to r and w to common black on controller? By the way the fan still kicks on occasionally running for no reason. I'm still Confused by this.

I have an update on the function of the furnace... just a little while ago I caught the furnace doing what it did before fan running with no heat. I did notice that if I turn up the thermostat it will begin the heating cycle and warm the house while the fan runs. only out of order

Hi Guys! Here is a little background. At the start of the winter season, the furnace had blown intermittantly warm and then would short cycle blowing cold until shut off at the switch. When it would blow warm it would go through a normal cycle of induction, preheat, then blow, gas off then blow till...