Got a fan blowing in the crawl space door near it. Will have to check it to see if it dried out. I guess if it feels dry I will leave it.Greg wrote:At the very least get it dried out to prevent mold. You may end up replacing the insulation in that area as well.
Greg
Search found 9 matches
- Sun Aug 07, 2016 11:41 am
- Forum: Mobile Home Repair
- Topic: Wet insulation in underbelly
- Replies: 3
- Views: 8695
Re: Wet insulation in underbelly
- Sun Aug 07, 2016 7:27 am
- Forum: Mobile Home Repair
- Topic: Wet insulation in underbelly
- Replies: 3
- Views: 8695
Wet insulation in underbelly
We had AC problems and it looks like the drain got clogged and allowed some water to collect in the under belly in that area. I cut a small slit to let it drain and have a fan in the crawl space door for now. Should that be opened up and replace that insulation or will it dry out?
- Thu Apr 12, 2012 6:39 pm
- Forum: Mobile Home Repair
- Topic: J channel type trim
- Replies: 4
- Views: 1828
Re: J channel type trim
So far no luck, theirs is not as wide and does not have the extra flange on it.
- Thu Apr 12, 2012 7:43 am
- Forum: Mobile Home Repair
- Topic: J channel type trim
- Replies: 4
- Views: 1828
J channel type trim
Our trim is damaged around our door from a hail storm. We have normal in swing doors, the storm doors are mounted to a molding, where the siding goes into what would normaly be j channel there is this piece like j channel but wider with a lip that also goes under the molding. Any idea where I can or...
- Sun Dec 18, 2011 11:23 pm
- Forum: Coleman Service & Repair
- Topic: Thermostat suggestion?
- Replies: 1
- Views: 2271
Thermostat suggestion?
We have a Coleman EB15 with a Intertherm heat pump. We are having a issue with the thermostat not keeping a constant temp. Any suggestions on a quality replacement? I hear good comments about Honeywell. We have a Hunter now and don't know it if was worth it. Someone is usally home all the time so I ...
- Thu Jul 28, 2011 6:37 am
- Forum: Coleman Service & Repair
- Topic: Coleman EB15B iced up?
- Replies: 1
- Views: 2018
Coleman EB15B iced up?
Got up this morning and blower was running with very little air flow. Found the a coil froze up and the large line iced up going to the heat pump with some of the lines I could see inside the heat pump iced up. Air flow has been good on the unit and filters are fairly new. Any suggestions? With the ...
- Sun Feb 06, 2011 11:39 am
- Forum: Mobile Home Repair
- Topic: Water heater replacement?
- Replies: 1
- Views: 806
Water heater replacement?
Our home came with a 50 gallon single element water heater. It is on a 20 amp breaker with 12 gauge wire. Most of the heaters sold locally are 50 4500 dual element heaters, I know both elements don't run at the same time. But would I need to upgrade to a 10 gauge wire and 30 amp breaker? Old heater ...
- Fri Dec 03, 2010 8:57 pm
- Forum: Coleman Service & Repair
- Topic: Coleman EB15B, banging noise?
- Replies: 3
- Views: 2005
Re: Coleman EB15B, banging noise?
I think I may have it fixed. finally got it to do it and be acle to get to it to check it. Felt like the blower was rapidly turning on and off. Wiggled around on things and got it to act up while playing around with the blower relay. Put a new one on it and for 24 hours it has been good, took the ol...
- Wed Dec 01, 2010 10:35 pm
- Forum: Coleman Service & Repair
- Topic: Coleman EB15B, banging noise?
- Replies: 3
- Views: 2005
Coleman EB15B, banging noise?
I think I have the banging narrowed down to the blower trying to kick in and out. The problem is so intermittent that it is hard to get a meter on things to see what is losing power. Looking at the diagram should the #2 and 5 terminals on the blower relay have power all the time. Just glanced at it ...