Yes, now that it is running from the bottom breaker.

Robert, When I went to check the transformer I noticed my Klein Voltmeter only read 48 vac on the top leg of the circuit breaker. The increments skip from 48 to 120 on my meter. This was probably the case last night as well. Here is what I did. I unplugged all of the wires at the bottom circuit and ...

Robert, This post run a little long sorry. Here are the readings I took last night, with the furnace on an theT-stat calling for heat. Sequencer- M-1 , M-2 , M-3 , and M-5 reading 120 vac M-4 seemed to come on and off , and I was losing power to the middle element. No reading on M-6 Also no readings...

My furnace has been blowing , but no hot air coming out (while it was doing this the green light was on , and the red light was flashing). I could usually reset the breakers and it would heat for a short while. I could feel the elements heat up and then the fan would kick on , but the heat wouldn't ...