I have a Blend air 2 system and had to replace the fan assembly up on the roof due to corrosion (I live near the ocean). That was two years ago.
Recently, the Blend air alarm came on and I used the trouble-shooting procedure on this site. It's a real help, by the way.
I traced the trouble down to the control board up on the motor/blower assembly on the roof. And I actually had saved the old one from when I did the replacement so I stuck that in and now it's working fine.
My question is this: the control board that I replaced was only two years old and looks in pristine shape since it was enclosed in that little box atop the blower assembly. Is this a problem area for these systems? Is there a warranty on this part?
The original worked for 5 years and is in use as I write this. (I'm going to replace it since that little four prong connector is a bit corroded even though I cleaned it up.)
Thanks.
Andy
Blend Air 2 system trouble
Hi Andy,
If it was purchased from us, no warranty is still available. It's doubtful anyone else would have a warranty on it after 2 years, but can't say for sure.
Those are like all circuit/control boards. They can fail for a variety of reasons.
I wouldn't say that they are any more prone to failure than other parts.
Take care and best wishes,
Robert
If it was purchased from us, no warranty is still available. It's doubtful anyone else would have a warranty on it after 2 years, but can't say for sure.
Those are like all circuit/control boards. They can fail for a variety of reasons.
I wouldn't say that they are any more prone to failure than other parts.
Take care and best wishes,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Disable Blend Air ll Attic fan
by 777stickman » Fri Nov 17, 2017 5:05 pm » in Coleman Service & Repair - 0 Replies
- 44410 Views
-
Last post by 777stickman
Fri Nov 17, 2017 5:05 pm
-
-
-
DGAT Series furnace air-conditioning issue
by minnie1967 » Thu Jul 13, 2017 9:48 am » in Coleman Service & Repair - 0 Replies
- 61916 Views
-
Last post by minnie1967
Thu Jul 13, 2017 9:48 am
-
-
- 1 Replies
- 23427 Views
-
Last post by Greg
Tue Dec 26, 2017 7:33 pm
-
- 0 Replies
- 33608 Views
-
Last post by Elainesplay
Sat Jul 13, 2019 9:54 am
-
-
Vapor or air barriers in outer walls?
by LEERAY2000 » Sat Sep 26, 2020 7:57 pm » in Mobile Home Repair - 3 Replies
- 52882 Views
-
Last post by mdnagel
Fri Dec 10, 2021 11:09 pm
-