My furnace is model # 7995-656/D
When the furnace is off there is a constant humming noise.
When I turn the fan switch off it goes away.
The furnace also has very short cycles, and when the cycle ends
after about a minute the blower starts back up for about 45 seconds to a minute. Any help would be appreciated. The anticipator setting is at .2
Thanks, jford
Coleman Presidential Furnace
You'll have to open control box and try to determine exactly where it is coming from.
Look in your owners manual or on the gas valve itself or on the data sticker on furnace for the correct heat anticipator setting.
Make sure filter is clean and also a-coil if you have a/c.
Thanks,
Robert
Look in your owners manual or on the gas valve itself or on the data sticker on furnace for the correct heat anticipator setting.
Make sure filter is clean and also a-coil if you have a/c.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
LOUD Blower on Coleman Presidential 2 900759
by AuntKatie » Thu Apr 05, 2018 6:50 pm » in Coleman Service & Repair - 0 Replies
- 44830 Views
-
Last post by AuntKatie
Thu Apr 05, 2018 6:50 pm
-
-
-
Eb12eb Coleman furnace 4 speed help.
by Johnwayne892000 » Thu Aug 30, 2018 7:37 pm » in Coleman Service & Repair - 0 Replies
- 24988 Views
-
Last post by Johnwayne892000
Thu Aug 30, 2018 7:37 pm
-
-
-
Coleman 6806a furnace doesn't stop heating even with tstat disconnected. Any ideas?
by Neighbor Bill » Mon Dec 31, 2018 1:01 pm » in Coleman Service & Repair - 1 Replies
- 41711 Views
-
Last post by Neighbor Bill
Mon Dec 31, 2018 1:06 pm
-
-
-
DGAT Series furnace air-conditioning issue
by minnie1967 » Thu Jul 13, 2017 9:48 am » in Coleman Service & Repair - 0 Replies
- 61916 Views
-
Last post by minnie1967
Thu Jul 13, 2017 9:48 am
-
-
-
Acceptable HEAT RISE number for this 20-yr. old furnace.
by justplumducky » Tue Aug 29, 2017 5:33 pm » in Nordyne Service & Repair - 0 Replies
- 44401 Views
-
Last post by justplumducky
Tue Aug 29, 2017 5:33 pm
-