Coleman Evcon EB17B
I'm having trouble with my furnace. The fan seems to work fine. The air temp isn't constant though. It's the right temp sometimes; then barely warm other times; and almost cool others. At anytime during the cycle the air can be any temp. Anybody have any ideas on what I can do? Thanks for your time
Could be a faulty sequencer contacts opening and closing intermittantly.
That would be first suspect.
Thanks,
Robert
That would be first suspect.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Thanks Robert; I appreciate the info and quick reply. Not being very knowledgeable on this subject, with a very limited budget, I'm wondering if I could find the sequencer, and what I could do to fix it? I have no manual and using google, found no place on the net to view one. I appreciate your time. Thanks again.
Sequencer # 3115-3571 @ $39.99 + $6.75 shipping .
You can see and order it from right side of page here through Paypal:
http://www.mobilehomerepair.com/ColemanElec.html
Click on pic for enlarged view.
OR, order by calling toll free between 9AM/5PM CST Mon thru Fri to
1-877-263-7860 and charging to Visa or Mastercard.
It is located beside transformer and above elements in controls area.
You remove wires one at a time (turn power OFF first) and reconnect to new sequencer.
Then remove screws and remove sequencer and remount new one.
The top and middle silver terminals are designated M1-M2, M3-M4 and M5-M6
Bottom brass terminals are H1-H2 and H3-H4 .
That would be most likely cause, but can't gaurantee as I'm not there to test.
Added ordering info needed if you're in Canada, let us know.
Thanks,
Robert
You can see and order it from right side of page here through Paypal:
http://www.mobilehomerepair.com/ColemanElec.html
Click on pic for enlarged view.
OR, order by calling toll free between 9AM/5PM CST Mon thru Fri to
1-877-263-7860 and charging to Visa or Mastercard.
It is located beside transformer and above elements in controls area.
You remove wires one at a time (turn power OFF first) and reconnect to new sequencer.
Then remove screws and remove sequencer and remount new one.
The top and middle silver terminals are designated M1-M2, M3-M4 and M5-M6
Bottom brass terminals are H1-H2 and H3-H4 .
That would be most likely cause, but can't gaurantee as I'm not there to test.
Added ordering info needed if you're in Canada, let us know.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 110046 Views
-
Last post by cwwhite75
Sat Feb 29, 2020 8:46 am
-
-
Colman evcon presidental 7980B856 furnace will not stay on
by ezridersid » Sat Dec 21, 2019 8:52 pm » in Mobile Home Repair - 1 Replies
- 17306 Views
-
Last post by ezridersid
Sat Dec 21, 2019 9:04 pm
-
-
-
Transformer burning out in an Evcon DES 80
by BigDave67s » Wed Dec 29, 2021 10:01 pm » in Coleman Service & Repair - 0 Replies
- 111977 Views
-
Last post by BigDave67s
Wed Dec 29, 2021 10:01 pm
-
-
-
Evcon Heat Pump - Air Conditioner Model No. BRHS036B Making HUM Before Starting
by Dave_L » Tue Aug 29, 2023 1:26 am » in Coleman Service & Repair - 0 Replies
- 126535 Views
-
Last post by Dave_L
Tue Aug 29, 2023 1:26 am
-
-
- 2 Replies
- 60295 Views
-
Last post by jazsimpson
Sat Jul 08, 2017 8:16 am