DGTA07BDC - Coleman furnace
my furnace lights and stays lit. chamber heats normally. when at correct temp fan goes on/off in 1 second cycles continuously. when chamber gets too hot breaker switch with red push button pops up, since not enough heat evacuated, and burner goes out. that was last nite. tonite fan doesn't run at all and after 10 minutes of full burner red button breaker pops and burner is shut off. 42 degrees in house this morn! just enough income to be disqualified for energy assistance and repair!
Fan Switch # 7975-3281 @ $13.21 + $6.75 shipping .
This is most likely the problem.
If interested, please order through Paypal from left side here:
http://www.mobilehomerepair.com/ColemanGas.html
OR, call toll free to 1-877-263-7860 between 9A/5P CST Mon thru Fri and charge to Visa or Mastercard.
More info needed if you're in Canada so let us know.
You can jumper the switch to see if it works proper with it jumpered, if so, replace it.
Thanks for inquiring,
Robert
This is most likely the problem.
If interested, please order through Paypal from left side here:
http://www.mobilehomerepair.com/ColemanGas.html
OR, call toll free to 1-877-263-7860 between 9A/5P CST Mon thru Fri and charge to Visa or Mastercard.
More info needed if you're in Canada so let us know.
You can jumper the switch to see if it works proper with it jumpered, if so, replace it.
Thanks for inquiring,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Eb12eb Coleman furnace 4 speed help.
by Johnwayne892000 » Thu Aug 30, 2018 7:37 pm » in Coleman Service & Repair - 0 Replies
- 24986 Views
-
Last post by Johnwayne892000
Thu Aug 30, 2018 7:37 pm
-
-
-
Coleman 6806a furnace doesn't stop heating even with tstat disconnected. Any ideas?
by Neighbor Bill » Mon Dec 31, 2018 1:01 pm » in Coleman Service & Repair - 1 Replies
- 41708 Views
-
Last post by Neighbor Bill
Mon Dec 31, 2018 1:06 pm
-
-
-
DGAT Series furnace air-conditioning issue
by minnie1967 » Thu Jul 13, 2017 9:48 am » in Coleman Service & Repair - 0 Replies
- 61916 Views
-
Last post by minnie1967
Thu Jul 13, 2017 9:48 am
-
-
-
Acceptable HEAT RISE number for this 20-yr. old furnace.
by justplumducky » Tue Aug 29, 2017 5:33 pm » in Nordyne Service & Repair - 0 Replies
- 44398 Views
-
Last post by justplumducky
Tue Aug 29, 2017 5:33 pm
-
-
-
Can't get the furnace cover to go on
by nestsman » Sat Sep 30, 2017 4:53 pm » in Nordyne Service & Repair - 2 Replies
- 48445 Views
-
Last post by tkrueger
Sat May 05, 2018 9:12 pm
-