Had same problem as some others about furnace
Had same problem with my furnace, DGAT075BDC, as some others about it clinking or igniter coming back on during middle of heating cycle and such. Did all the cleaning, checked all connections, even redid some connections. But now it seems to be working ok. But I did notice on the "Ignition Module" that some of the male tabs for the connectors were lose, mainly the one for the valve, so I used popsicle sticks, sized to fit, to prop the connections in place. I just recently order a new "I-M" with a local H-C Co. So I'll check back with any updates I have when I replace the "I-M".... Oh I forgot to mention, don't over oil the booster motor. Doing so caused some oil to drip down some wires and onto the "I-M" and into the case, which maybe the cause to all my problems.....
If you have a question, ask away. Otherwise, giving suggestions and/or advice on solutions for HVAC problems is not allowed unless qualified to do so.
Thanks,
Robert
Thanks,
Robert
Last edited by Robert on Thu Nov 29, 2007 12:06 am, edited 1 time in total.
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Sorry, just trying to be helpful. I've learned though life that being helpful or helping others is kinda like a catch-22 or double edged sword ....
Yes, IF you are experienced enough to not cost someone money or worse, injury/death with your advice.
Guessing at HVAC DIY is not safe.
This is a DIY forum monitored by very experienced people to ensure that those things hopefully do not happen.
I do appreciate your willingness to offer help to others though, please keep at it, but also know your limitations.
This is for your safety as well.
Take care and best wishes,
Robert
Guessing at HVAC DIY is not safe.
This is a DIY forum monitored by very experienced people to ensure that those things hopefully do not happen.
I do appreciate your willingness to offer help to others though, please keep at it, but also know your limitations.
This is for your safety as well.
Take care and best wishes,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 11805 Views
-
Last post by rockncountry101
Sun Jun 10, 2018 10:54 am
-
- 4 Replies
- 9102 Views
-
Last post by Norm Frechette
Thu Sep 07, 2017 5:27 am
-
-
DGAT Series furnace air-conditioning issue
by minnie1967 » Thu Jul 13, 2017 9:48 am » in Coleman Service & Repair - 0 Replies
- 61916 Views
-
Last post by minnie1967
Thu Jul 13, 2017 9:48 am
-
-
-
Acceptable HEAT RISE number for this 20-yr. old furnace.
by justplumducky » Tue Aug 29, 2017 5:33 pm » in Nordyne Service & Repair - 0 Replies
- 44396 Views
-
Last post by justplumducky
Tue Aug 29, 2017 5:33 pm
-
-
-
Can't get the furnace cover to go on
by nestsman » Sat Sep 30, 2017 4:53 pm » in Nordyne Service & Repair - 2 Replies
- 48444 Views
-
Last post by tkrueger
Sat May 05, 2018 9:12 pm
-