any suggestions on how I could locate a used natural gas MH furnance?
the current furnance has had the gas regulator, thermocouple, and pilot light replaced, numerous pressure checks, pilot light was not staying lit after the repair.
when it did stay light, I came back to rehab MH, turned up the furnance, heard the burner light.. a few minutes later, when fan came on, whoosh boom, and the door blew off the front. So it was not likely that the gas built up before the burner lit, but afterward.
I have had a second repair company look at the furnance, neither they or the first repair company can tell me what happened, or whether it is likely to happen again. they keep saying gas furnances this age (1980s) are pretty simple, there is nothing else to check!
I decided it I would be happiest with a different furnance... I have winterized the MH, and am trying to find a different furnance. I was quoted $2200 for a new coleman, including install and new roof jack etc.
I am in SW ohio, near Cincinnati.
Brenda (OH) 513-505-5399
need a used gas MH furnance
Hi Brenda,
I am going to move this to the All Other HVAC Questions forum. This is reserved for actual repair questions.
It may take Robert or another to get to you on this as it is not a emergency at this time. The techs are real busy this time of year.
Hold tight and someone will get to you.
In the meantime you could call around to some of your local MH supply stores and see what their prices are.
Happy Holidays,
Yanita
I am going to move this to the All Other HVAC Questions forum. This is reserved for actual repair questions.
It may take Robert or another to get to you on this as it is not a emergency at this time. The techs are real busy this time of year.
Hold tight and someone will get to you.
In the meantime you could call around to some of your local MH supply stores and see what their prices are.
Happy Holidays,
Yanita
The difference between success and failure is who gives up first!
Buying a used gas furnace is not something I would suggest, too many variables that could be dangerous to you .
As for other problem, find a reputable HVAC company that can inspect and find problem area.
With all you have replaced, what it is doing and two companies involved, not safe wise for me to try and find solution from here.
Thanks,
Robert
As for other problem, find a reputable HVAC company that can inspect and find problem area.
With all you have replaced, what it is doing and two companies involved, not safe wise for me to try and find solution from here.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Furnance continues to click, Fan always on
by rcrown1872 » Tue Oct 01, 2019 11:55 am » in Nordyne Service & Repair - 0 Replies
- 25695 Views
-
Last post by rcrown1872
Tue Oct 01, 2019 11:55 am
-
-
-
Buying used - Single wide vs Double wide
by mobtek » Tue Feb 11, 2020 3:58 pm » in Mobile Home Repair - 7 Replies
- 28245 Views
-
Last post by Greg
Fri Feb 14, 2020 8:58 am
-
-
-
Need to remove a stripped Allen wrench-type plug from the OUT PRESS port on top of gas valve
by justplumducky » Fri Aug 25, 2017 8:21 am » in Nordyne Service & Repair - 1 Replies
- 49079 Views
-
Last post by Maxwell.lipphardt
Mon Feb 04, 2019 6:29 am
-
-
-
I am thinking of switching to a gas water heater
by deryk the gypsy » Sat Jul 22, 2017 7:16 am » in Mobile Home Repair - 2 Replies
- 39159 Views
-
Last post by Greg
Sat Jul 22, 2017 12:26 pm
-
-
-
Intertherm standing pilot LPG burner 77 BTU IN gas valve mounting plate gets hot ( not warm).
by justplumducky » Sat Sep 09, 2017 3:34 am » in Nordyne Service & Repair - 1 Replies
- 74895 Views
-
Last post by Maxwell.lipphardt
Thu Nov 22, 2018 10:15 am
-