Coleman 7700A, Main burner will not light, Help!
My Coleman model 7700A, Series 856, Burner will not light. Pilot light is on, and when thermostat is raised, the draft motor starts and runs, but the main burner will not ignite. Where do I start?
I'm no expert on them, but I would try replacing the thermocoupler first. Most home centers & hardware stores have them. If it goes bad it is telling the control valve that the pilot is out and not to open the main gas valve. Greg
"If I can't fix it, I can screw it up so bad no one else can either."
Thanks for your reply. I couldn't wait to see if someone would reply to my post, so I just call my local tech. Had to get the heat back on ASAP! Its cold here.
What was found was the high heat switch that tells the blower fan when to kick on was bad. A $75.00 Service call, and an $18.00 part. Money well spent for me, I would have spent all day trying to figure it out.
Thanks again.
What was found was the high heat switch that tells the blower fan when to kick on was bad. A $75.00 Service call, and an $18.00 part. Money well spent for me, I would have spent all day trying to figure it out.
Thanks again.
Hi,
Sorry I wasn't available earlier, glad you got it going again.
Thanks for update.
Take care and best wishes,
Robert
Sorry I wasn't available earlier, glad you got it going again.
Thanks for update.
Take care and best wishes,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Intertherm standing pilot LPG burner 77 BTU IN gas valve mounting plate gets hot ( not warm).
by justplumducky » Sat Sep 09, 2017 3:34 am » in Nordyne Service & Repair - 1 Replies
- 74895 Views
-
Last post by Maxwell.lipphardt
Thu Nov 22, 2018 10:15 am
-
-
- 1 Replies
- 41999 Views
-
Last post by Greg
Sat Jan 06, 2018 9:11 am
-
-
intertherm standing pilot propane burner Heat Rise of 38°F spread.
by justplumducky » Fri Aug 25, 2017 10:06 am » in Nordyne Service & Repair - 0 Replies
- 55120 Views
-
Last post by justplumducky
Fri Aug 25, 2017 10:06 am
-
-
- 2 Replies
- 20919 Views
-
Last post by TorstenW
Tue Mar 06, 2018 1:04 am
-
- 1 Replies
- 24372 Views
-
Last post by Greg
Sat Jul 29, 2017 7:14 pm