Miller Furnace
I have a Miller Model CMF80-PG propane furnace serial number MA0488-00496. When the T-stat calls for heat, the burner comes on and a short while later the blower kicks in but only runs for 2-3 minutes and shuts off for a minute or two before starting again. This continues until the set temperature is reached. I don't remember it being like this last winter when I bought the place. Any ideas?
Whatever It Takes
Hi,
Will have to contact distributor and see if they have a replacement Fan & Limit Switch and if so, what new part number is.
That would be first suspect. You can test it to see if it is opening and closing during cycle.
Thanks,
Robert
Will have to contact distributor and see if they have a replacement Fan & Limit Switch and if so, what new part number is.
That would be first suspect. You can test it to see if it is opening and closing during cycle.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Hi,
Fan & Limit Control # 626436 @ $61.59 + $8.00 shipping .
It can be seen and ordered through PayPal from right side here:
http://www.mobilehomerepair.com/NordyneGas.html
Or, by calling toll free after 9AM CST Mon thru Fri to
1-877-263-7860 and charging to Visa or Mastercard.
Not sure that's the problem, but without being there, it would be my first suspect problem.
Thanks for inquiring,
Robert
Fan & Limit Control # 626436 @ $61.59 + $8.00 shipping .
It can be seen and ordered through PayPal from right side here:
http://www.mobilehomerepair.com/NordyneGas.html
Or, by calling toll free after 9AM CST Mon thru Fri to
1-877-263-7860 and charging to Visa or Mastercard.
Not sure that's the problem, but without being there, it would be my first suspect problem.
Thanks for inquiring,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
I need wiring assistance for a miller furnace serial number A0981-0685
by Timodell » Wed Nov 20, 2019 10:40 pm » in Nordyne Service & Repair - 0 Replies
- 65800 Views
-
Last post by Timodell
Wed Nov 20, 2019 10:40 pm
-
-
-
have intertherm heat pump with a 913421 control box tying to a miller 841 thermo stat ,
by hillcat01 » Mon Oct 21, 2019 7:28 pm » in Nordyne Service & Repair - 0 Replies
- 87007 Views
-
Last post by hillcat01
Mon Oct 21, 2019 7:28 pm
-
-
-
Fluctuating flue draft Miller CMF2 80 PO CONV
by ctwap2783 » Sat Feb 22, 2020 9:36 pm » in Nordyne Service & Repair - 0 Replies
- 123093 Views
-
Last post by ctwap2783
Sat Feb 22, 2020 9:36 pm
-
-
- 0 Replies
- 132604 Views
-
Last post by wogman75
Tue Jul 28, 2020 2:43 pm
-
-
DGAT Series furnace air-conditioning issue
by minnie1967 » Thu Jul 13, 2017 9:48 am » in Coleman Service & Repair - 0 Replies
- 61999 Views
-
Last post by minnie1967
Thu Jul 13, 2017 9:48 am
-