I have a Used Coleman 3400A812. I am trying to install it in my trailer. My questions are how to hook up thermostat, andwill this unit heat a double wide well?
Thanks in advance, Chris
Used Coleman Furnace, New installation
Do you have heat only or heat & a/c ?
Is t-stat digital, programmable, etc... ?
How many wires going to t-stat, 2 or 4+ ?
It may work if home is not very big.
What is homes square footage ?
Only way to know exact size needed is a Manual J Load Calc, preferrably one by ACCA (Air Conditioning Contractors of America).
Thanks,
Robert
Is t-stat digital, programmable, etc... ?
How many wires going to t-stat, 2 or 4+ ?
It may work if home is not very big.
What is homes square footage ?
Only way to know exact size needed is a Manual J Load Calc, preferrably one by ACCA (Air Conditioning Contractors of America).
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Robert,
Thanks for the reply.
Heat only
digital t-stat, no programmable (GemTech GT 5000)
2 wires coming out of the heater red and white, I found the website for this so I think that I have that figured out. Is this heater 24 vac to t-stat? I know that it is a 240vac heater, but this t-stat only had instructions for 24 vac electric heaters.
Square footage is approx. 1000
What is a manual J load calc?
thanks chris
Thanks for the reply.
Heat only
digital t-stat, no programmable (GemTech GT 5000)
2 wires coming out of the heater red and white, I found the website for this so I think that I have that figured out. Is this heater 24 vac to t-stat? I know that it is a 240vac heater, but this t-stat only had instructions for 24 vac electric heaters.
Square footage is approx. 1000
What is a manual J load calc?
thanks chris
Robert,
I also need to see about a disconnect for this unit as I have discovered that I don't have the deal that plugs in to connect the power from where I wired it to the 4 fuses.
Thanks,
Chris
I also need to see about a disconnect for this unit as I have discovered that I don't have the deal that plugs in to connect the power from where I wired it to the 4 fuses.
Thanks,
Chris
Hi Chris,
Yes, it is 24vac to t-stat.
Manual J Load Calc is a program to determine exact size of units needed for homes.
Will probably be ok for 1000 sq. ft. if it has decent insulation and you keep the underbelly and skirting sealed tight.
Are you saying you just do not have the pull handle part ?
If so, they are no longer sold seperate, would need disconnect assembly.
How many fuses and what sizes ?
Thanks,
Robert
Yes, it is 24vac to t-stat.
Manual J Load Calc is a program to determine exact size of units needed for homes.
Will probably be ok for 1000 sq. ft. if it has decent insulation and you keep the underbelly and skirting sealed tight.
Are you saying you just do not have the pull handle part ?
If so, they are no longer sold seperate, would need disconnect assembly.
How many fuses and what sizes ?
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Robert,
Thanks for the info, Yes I just need the pull handle, I have the fuses (2-30amp & 2-40amps) and the block that the pull handle goes in.
Thanks,
Chris
Thanks for the info, Yes I just need the pull handle, I have the fuses (2-30amp & 2-40amps) and the block that the pull handle goes in.
Thanks,
Chris
See my above reply, will have to purchase whole disconnect assembly.
I believe I replied by email as well.
Thanks,
Robert
I believe I replied by email as well.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Buying used - Single wide vs Double wide
by mobtek » Tue Feb 11, 2020 3:58 pm » in Mobile Home Repair - 7 Replies
- 28245 Views
-
Last post by Greg
Fri Feb 14, 2020 8:58 am
-
-
-
Question about installation over existing floor
by Stormymonday » Sat Sep 15, 2018 3:06 pm » in Off Topic Discussions - 1 Replies
- 27815 Views
-
Last post by Greg
Fri Sep 21, 2018 7:08 pm
-
-
- 2 Replies
- 50857 Views
-
Last post by Mark440
Thu Apr 11, 2019 11:15 am
-
-
Eb12eb Coleman furnace 4 speed help.
by Johnwayne892000 » Thu Aug 30, 2018 7:37 pm » in Coleman Service & Repair - 0 Replies
- 24988 Views
-
Last post by Johnwayne892000
Thu Aug 30, 2018 7:37 pm
-
-
-
Coleman 6806a furnace doesn't stop heating even with tstat disconnected. Any ideas?
by Neighbor Bill » Mon Dec 31, 2018 1:01 pm » in Coleman Service & Repair - 1 Replies
- 41711 Views
-
Last post by Neighbor Bill
Mon Dec 31, 2018 1:06 pm
-