I have a Honeywell kerosene furnace in my MH. Everything was working good until last night...
Was...
I litterly just had the painting done when the next day it stopped working. I noticed they sprayed the louvered door in front of the furnace closet and when I opened up the furnace door to inspect I noticed that there was no "filter" in the main opening (register). The furnace is getting k2 all the way to the head. Is it possible that it could of sucked up paint particles and clogged the jet?
Any help is appreciated...
No heat...
- Dirty White Boy
- Posts: 72
- Joined: Sun Dec 09, 2007 7:16 pm
- Location: New York
...it doesn't even fire for a second, just thought I should throw that in there. The filter is clean.
That's a possibility, check all the way to burner to ensure passageways are all open and clear.
Then check for power.
Thanks,
Robert
Then check for power.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 23715 Views
-
Last post by nestsman
Sat Aug 19, 2017 1:47 pm
-
-
intertherm standing pilot propane burner Heat Rise of 38°F spread.
by justplumducky » Fri Aug 25, 2017 10:06 am » in Nordyne Service & Repair - 0 Replies
- 55119 Views
-
Last post by justplumducky
Fri Aug 25, 2017 10:06 am
-
-
-
Acceptable HEAT RISE number for this 20-yr. old furnace.
by justplumducky » Tue Aug 29, 2017 5:33 pm » in Nordyne Service & Repair - 0 Replies
- 44398 Views
-
Last post by justplumducky
Tue Aug 29, 2017 5:33 pm
-
-
- 0 Replies
- 42046 Views
-
Last post by David DeBord
Sun Oct 22, 2017 7:13 am
-
-
A/C and heat comes from the ceiling vents. Are the existing floor vents necessary?
by NanaMary » Tue Nov 21, 2017 12:35 pm » in All Other HVAC Questions - 2 Replies
- 55497 Views
-
Last post by NanaMary
Fri Nov 24, 2017 11:14 am
-