Problem with Coleman DGAT056BDD

Questions about repairs and parts for Coleman furnaces, air conditioners and heat pumps for manufactured homes. Click here for Coleman parts.

Moderators: Greg, Mark

Locked
jtgribble

I have a Coleman DGAT056BDD. It will run correctly through 2 or three cycles. Then, it goes out and will not restart. The diagnostic light strobes quickly and continuously, not in a numbered sequence. If I turn the power off and then restart it, the diagnostic light turns solid again, the furnace lights and it will run through 2 or three cycles. Does anyone have any ideas what the problem may be?
Top
User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

Hi,

That's usually indicative of a polarity issue, but with it working afterwards for a while, could be a circuit board going bad.


I would have a Tech check it to be sure.


Thanks,
Robert
Last edited by Robert on Fri Mar 14, 2008 3:54 pm, edited 1 time in total.
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Top
jtgribble

Thank you very much!
Top
User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

You're very welcome, happy to help.


Take care and best wishes,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Top
Locked
  • Similar Topics
    Replies
    Views
    Last post

Return to “Coleman Service & Repair”