Hi guys,
First time posting since I got a problem on my AC or Heating unit. My AC/Heating was working fine until I came back from short vacation. My furnace is a Coleman model #DGAA090BDTA and a Trane AC unit.
I set my thermostat for heat or cold and my unit would not turn on. Check fused and all is fine. Check my furnace and light indicator is 4 blinking pointing to limit switch being open. My unit is a downward blower. I'd only saw one limit switch not sure if it's upper or lower. Writing on it is 025-35381 L145-30F.
My question is this the only problem? If I replaced this part will it fix my issue or do I need further testing? If so what do I need to do? Any help is greatly appreciated.
Thank you....Luey
AC and Heat won't turn on. 4 Light blinking on furnace.
Okay...I've found the upper limit switch. Tested the lower limit switch and I got low resistance reading on my multimeter.
The upper limit switch with no number written on it has no reading whatsoever. No continuity or high resistance. Could this be my problem? The upper limit switch?
Luey
The upper limit switch with no number written on it has no reading whatsoever. No continuity or high resistance. Could this be my problem? The upper limit switch?
Luey
Nevermind...I've found the culprit. It was the upper limit switch.
By jumping I was able to turn my AC on.
By jumping I was able to turn my AC on.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 167499 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
-
In too deep to turn back now... now what?
by Do it herselfer » Thu Nov 02, 2017 11:28 pm » in Mobile Home Repair - 2 Replies
- 26403 Views
-
Last post by yakima4$
Tue Dec 05, 2017 8:29 pm
-
-
-
A/C and heat comes from the ceiling vents. Are the existing floor vents necessary?
by NanaMary » Tue Nov 21, 2017 12:35 pm » in All Other HVAC Questions - 2 Replies
- 55617 Views
-
Last post by NanaMary
Fri Nov 24, 2017 11:14 am
-
-
-
Heat exchanger walls and floor all sooted up.
by plumducky » Sat Jan 25, 2020 5:05 pm » in Coleman Service & Repair - 1 Replies
- 28784 Views
-
Last post by Filkinson
Tue Feb 18, 2020 9:01 am
-
-
- 1 Replies
- 24378 Views
-
Last post by Greg
Sat Jul 29, 2017 7:14 pm