What is this vent?

Repair help for the do-it-yourselfer.
For mobile home parts, click here.

Moderators: Greg, Mark, mhrAJ333, JD

Locked
heartmadeforyou
Posts: 6
Joined: Tue Apr 29, 2008 10:24 pm
Location: Marion, IA
Contact:

My daughter is new to mobile home ownership and she has a round plastic vent on the exterior of the home that appears to go through the wall because we can see the round louvered cover on the inside of her home, too.

It is near floor level and is in the hall.

Any idea what this vent is for or how to get a replacement? (The louvered cover on the outside is broken.)

Thanks for your help!
Are we there yet?
User avatar
Yanita
Moderator
Posts: 3369
Joined: Sat Feb 17, 2007 10:16 pm
Location: Eastern N. Carolina

Hi,

Welcome to the site.

I am going to remove this to the Repair forum. I have no clue what this is, maybe someone can answer over there.

Can you post a pic of it?

LOL, not sure how many guys read this forum so I will put your post where it will get more attention.

Yanita
The difference between success and failure is who gives up first!
User avatar
Greg
Moderator
Posts: 5696
Joined: Wed Feb 28, 2007 8:01 pm
Location: Weedsport, NY

Hi & welcome. My first guess would be a dryer vent, but I don't know why there would be a louver on the inside. Is it in an area that would be large enough for a dryer? Greg
"If I can't fix it, I can screw it up so bad no one else can either."
Dean2

Louvered vent low on the exterior wall? Of a hallway? Am I reading this correctly?

Got pics?

Dean
Dean2

Almost sounds like some sort of venting for a summer home that is/was unoccupied for months at a time. Are the louvers fixed in position or do the flap open/closed?

I gotta admit,sounds custom.
heartmadeforyou
Posts: 6
Joined: Tue Apr 29, 2008 10:24 pm
Location: Marion, IA
Contact:

I'll get pictures and post tomorrow. This home has been lived in year round. I'm sure I'm just not describing it well enough for anyone to know what I'm talking about. :lol:

The louvers are fixed and I know it's not a dryer vent.

Thanks!
Miki
Are we there yet?
heartmadeforyou
Posts: 6
Joined: Tue Apr 29, 2008 10:24 pm
Location: Marion, IA
Contact:

Yea! I think I figured out what this vent is. It's a wall pressure balancing damper. Now to get a replacement part...

Thanks for your help.
Miki
Are we there yet?
User avatar
Greg
Moderator
Posts: 5696
Joined: Wed Feb 28, 2007 8:01 pm
Location: Weedsport, NY

That's a new on on me! Greg
"If I can't fix it, I can screw it up so bad no one else can either."
User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

Hi,


Yep, that's what it is, a wall pressure balancing damper for your Blend Air system .


It can be seen and ordered through PayPal from us at left side here:

http://www.mobilehomerepair.com/ColemanBlendAir.html


Scroll down left side to locate.




Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Locked
  • Similar Topics
    Replies
    Views
    Last post