I have a question about Packaged central air systems. I know they have an external blower (hence packaged unit) but the furnace closet seems to get really cold while the rest of the house is struggles to cool.
Should the central air be turning on the furnace blower as well or should it only use the external blower? I know when I turn on the furnace blower manually the air from the registers do blow faster, but I'm not sure if this is the correct operation of the unit. Currently the T-stat does not operate the furnace blower.
Thanks for the help!!
Packaged unit & Furnace Blower Question
Hi,
No, the furnace blower remains off and air is circulated by packaged unit blower.
If furnace area is cool, may want to see if a close off damper was installed under furnace and at the supply duct connection to main trunkline.
It should have one and if furnace is gas, dangerous not to.
Thanks,
Robert
No, the furnace blower remains off and air is circulated by packaged unit blower.
If furnace area is cool, may want to see if a close off damper was installed under furnace and at the supply duct connection to main trunkline.
It should have one and if furnace is gas, dangerous not to.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Thanks for the quick response!
The furnace has a label saying there is a damper installed under it. I'll check it out and see if it's workin correctly. Thanks alot
The furnace has a label saying there is a damper installed under it. I'll check it out and see if it's workin correctly. Thanks alot
You're very welcome. Be sure it is installed with louvers parallel to the duct.
Take care and best wishes,
Robert
Take care and best wishes,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Well I was going to check the dampers but got side tracked when I noticed that the flex duct (cool side) had been infiltrated by some kind of rodents. The flex is just laying on the concrete slab. I spent the evening making temp repairs.
Now comes the question how hard would it be to install rigid duct? Would it be better than flex? Would lowes or Home Depot carry what I would need?
Thanks again for your help Robert.
Now comes the question how hard would it be to install rigid duct? Would it be better than flex? Would lowes or Home Depot carry what I would need?
Thanks again for your help Robert.
Hi,
You're very welcome. Lowe's and HD most likely wouldn't have what is needed, but I have never tried to buy that there.
Best to go to an HVAC Supply House.
Thanks,
Robert
You're very welcome. Lowe's and HD most likely wouldn't have what is needed, but I have never tried to buy that there.
Best to go to an HVAC Supply House.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 42047 Views
-
Last post by David DeBord
Sun Oct 22, 2017 7:13 am
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 167390 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
-
Intertherm outdoor a/c unit, blower not turning off. Model unknown rating plate is faded out.
by tkrueger » Sat May 05, 2018 8:57 pm » in Nordyne Service & Repair - 0 Replies
- 116444 Views
-
Last post by tkrueger
Sat May 05, 2018 8:57 pm
-
-
-
G.E.supplemental coil heater in wall unit
by stevenbrooks » Mon Jul 17, 2017 4:00 pm » in Service & Repair of Other Brands - 0 Replies
- 38634 Views
-
Last post by stevenbrooks
Mon Jul 17, 2017 4:00 pm
-
-
-
Nordyne Mod. E1EH-015HA split unit/eliminate cooling?
by carolina jim » Thu Oct 24, 2019 8:33 am » in Nordyne Service & Repair - 0 Replies
- 39437 Views
-
Last post by carolina jim
Thu Oct 24, 2019 8:33 am
-