Hello everyone, I've been searching for almost 4 hours and could not find the answer to my problem
I have a Coleman Presidential
Model 7970C856
serial 930375494
THe problem is that when I turn the fan switch to Auto,,it doesn't kick, but when I turn it to on, it worked fine.....
the A/C works fine, I don't know what is the problem with furnace..
can someone help me please
Niceguy
Blower does not work on Auto
If the fan will not come on during the heating cycle automatically the part below should be the cause. You can order the switch and it will be shipped to you for your convince. The part number is 7975-3281 and it is located on the link posted below. Left side of the page half way down.
Once you receive the part you need to turn the main power off to your furnace and locate the fan switch on your wiring diagram. Remove the old switch and replace with the new. Easy since there are only two wires that pull off and push on the connections.
This is a common problem with these furnaces.
Hvac1000
Once you receive the part you need to turn the main power off to your furnace and locate the fan switch on your wiring diagram. Remove the old switch and replace with the new. Easy since there are only two wires that pull off and push on the connections.
This is a common problem with these furnaces.
Hvac1000
thank you very much HVAC200, and also thank you to every who helped me in the past..
I just ordered the part
Gosh, I wish the owner of this website receives donation, so I can donate some of the money that I saved by fixing the mobile myself....
I bought the manual and alot of parts, repairs here to help out the website....
sorry grammar kinda bad
Niceguy
I just ordered the part
Gosh, I wish the owner of this website receives donation, so I can donate some of the money that I saved by fixing the mobile myself....
I bought the manual and alot of parts, repairs here to help out the website....
sorry grammar kinda bad
Niceguy
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Intertherm outdoor a/c unit, blower not turning off. Model unknown rating plate is faded out.
by tkrueger » Sat May 05, 2018 8:57 pm » in Nordyne Service & Repair - 0 Replies
- 116439 Views
-
Last post by tkrueger
Sat May 05, 2018 8:57 pm
-
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 167385 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
-
Intertherm standing pilot LPG burner 77 BTU IN gas valve mounting plate gets hot ( not warm).
by justplumducky » Sat Sep 09, 2017 3:34 am » in Nordyne Service & Repair - 1 Replies
- 74891 Views
-
Last post by Maxwell.lipphardt
Thu Nov 22, 2018 10:15 am
-
-
-
Heat strips are on, but not the fan.
by Forestbrook » Sat Dec 08, 2018 6:09 pm » in Coleman Service & Repair - 0 Replies
- 42147 Views
-
Last post by Forestbrook
Sat Dec 08, 2018 6:09 pm
-
-
- 2 Replies
- 27489 Views
-
Last post by plumducky
Tue Dec 10, 2019 3:59 pm