Has anyone installed these panels on their roof? and if so did u like the results?
p.s. my roof is flat and then i have a stick built addition to my livingroom that has a midly pitched roof... I am having a problem with leaking where the mobile home meets the addition the former owner just cut a large section out of the mobile home to add the built on room.
Ondura roof panels
Moderators: Greg, Mark, mhrAJ333, JD
Here is a link
http://www.ondura.com/index.htm
Looked all through the site and was not able to see what the stuff is actually made or. With the recycled materials icon, it makes me think some type of plastic or composite.
JD
http://www.ondura.com/index.htm
Looked all through the site and was not able to see what the stuff is actually made or. With the recycled materials icon, it makes me think some type of plastic or composite.
JD
☯JD♫
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
Hi,
It looks identical to the stuff you can buy at Lowe's. We used some for a porch roof, but not something I would want on my house roof. It got real brittle after 3 years in the hot N.Carolina sun.
If you are looking to redo your roof then get Mark's Manuel and consider the metal roof over that is advertised in there. Complete installation instructions are there as well.
Have a great day!
~Yanita~
It looks identical to the stuff you can buy at Lowe's. We used some for a porch roof, but not something I would want on my house roof. It got real brittle after 3 years in the hot N.Carolina sun.
If you are looking to redo your roof then get Mark's Manuel and consider the metal roof over that is advertised in there. Complete installation instructions are there as well.
Have a great day!
~Yanita~
The difference between success and failure is who gives up first!
Hi Curlylocks,
I have to agree with JD and Yanita here. You want your roof to last a really long time!
We had ours done years ago in a metal metal roof over.
JD has excellent photos of this type of roof on his website. Mark also has an article of it done as a DIY project.
Ours has been on the house for almost 9 years now. Well worth the money!
Maureen
I have to agree with JD and Yanita here. You want your roof to last a really long time!
We had ours done years ago in a metal metal roof over.
JD has excellent photos of this type of roof on his website. Mark also has an article of it done as a DIY project.
Ours has been on the house for almost 9 years now. Well worth the money!
Maureen
-
- Similar Topics
- Replies
- Views
- Last post
-
-
'73 Viking Doublewide - Odd Ceiling Panels Hard to Remove
by 73Viking » Mon Dec 03, 2018 1:05 am » in Mobile Home Repair - 4 Replies
- 31198 Views
-
Last post by Greg
Mon Dec 10, 2018 5:34 pm
-
-
-
Metal exterior wall/ ceiling panels?
by Aarond8743 » Fri Feb 28, 2020 7:20 pm » in Mobile Home Repair - 3 Replies
- 15934 Views
-
Last post by Greg
Sun Mar 01, 2020 7:08 pm
-
-
-
Questions about steel roof options for arched roof
by Reezer76 » Thu Sep 14, 2017 9:41 pm » in Mobile Home Repair - 2 Replies
- 65024 Views
-
Last post by JD
Sun Sep 17, 2017 4:31 pm
-
-
- 5 Replies
- 103794 Views
-
Last post by JenniferK
Wed Nov 22, 2017 12:52 am
-
- 2 Replies
- 65650 Views
-
Last post by JenniferK
Fri Nov 24, 2017 2:02 am