Compressor and Fan will not start

Questions about repairs and parts for Coleman furnaces, air conditioners and heat pumps for manufactured homes. Click here for Coleman parts.

Moderators: Greg, Mark

Locked
jcronin885

I have a Split Coleman system model BRCS0361CB and when you turn the thermostat to cool the contactor will move forward but the compressor and fan will not run. The unit has power going to it and I feel that it has a bad dual run capacitor. before I buy a replacement capacitor I just wanted someone else to give me there input.
Top
User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

Hi,

CAREFULLY use a screwdriver WITH electrical insulated handle to push inward on bar at contactor to be sure it IS pulling in all the way.


Also, be sure you have full 240vac entering and exiting contactor.


If so, most likely the dual run cap.


If you need ordering info, let me know.


Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Top
jcronin885

I put in a new dual run capacitor and it took right off, Thanks.
Top
User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

Hi,

That's great and you're very welcome, happy to help.


Take care and best wishes,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Top
Locked
  • Similar Topics
    Replies
    Views
    Last post

Return to “Coleman Service & Repair”