So I finally put on gloves and cleaned the gas oven....the one that had evidence of a mouse having been in residence at some time or other on the very bottom, where the broiler is....
And then I fired it up. You can put your fingers through these vent like openings that lets the heat into the oven. (I'm thinking, how do I know if a mouse ever came back that I'm not going to bake one...)
I like electric. Guy friend looked at electrical panel in my room and said I'm not wired for an electric stove.
Well, are all electric stoves the kind that have the big plugs like dryers do? How about apartment size stoves, anyone know if any of them can just plug into a regular outlet? (No mouse could ever get into the oven of an electric stove, I think.) Sherry
gas oven question
Sherry, All of the electric ranges should have the big 30 - 50 amp plugs on them. If you have service enough coming to the box any electrician can add a sub panel and run the wires from that. Check with a qualified electeician in your area to see if it is possible. Greg
"If I can't fix it, I can screw it up so bad no one else can either."
Hi,
As Greg said, call a licensed electrician. Hate to burst your bubble...but yes mice can get into an electric stove/oven and destroy it as well.
Yanita
As Greg said, call a licensed electrician. Hate to burst your bubble...but yes mice can get into an electric stove/oven and destroy it as well.
Yanita
The difference between success and failure is who gives up first!
-
- Similar Topics
- Replies
- Views
- Last post
-
-
I am thinking of switching to a gas water heater
by deryk the gypsy » Sat Jul 22, 2017 7:16 am » in Mobile Home Repair - 2 Replies
- 39161 Views
-
Last post by Greg
Sat Jul 22, 2017 12:26 pm
-
-
-
Need to remove a stripped Allen wrench-type plug from the OUT PRESS port on top of gas valve
by justplumducky » Fri Aug 25, 2017 8:21 am » in Nordyne Service & Repair - 1 Replies
- 49086 Views
-
Last post by Maxwell.lipphardt
Mon Feb 04, 2019 6:29 am
-
-
-
Intertherm standing pilot LPG burner 77 BTU IN gas valve mounting plate gets hot ( not warm).
by justplumducky » Sat Sep 09, 2017 3:34 am » in Nordyne Service & Repair - 1 Replies
- 74900 Views
-
Last post by Maxwell.lipphardt
Thu Nov 22, 2018 10:15 am
-
-
- 0 Replies
- 42050 Views
-
Last post by David DeBord
Sun Oct 22, 2017 7:13 am
-
-
Remodel-Radiant Barrier In Wall Cavity Question
by ChuckInTX » Fri Jul 07, 2017 3:21 pm » in Mobile Home Repair - 0 Replies
- 45919 Views
-
Last post by ChuckInTX
Fri Jul 07, 2017 3:21 pm
-