DGAT056BDD
I've lost my manual, can you give me the troubleshooting codes. Mine is flashing 3 times. I'm pretty sure its the board, we think the vent leaked and got it wet!! It's happened before, you would think we would remember to check it more often!
Hi,
Flash Code:
No light = No power or open fuse
Steady green = Control has power
1 = Ignition failure
2 = Centrifugal switch shorted
3 = Centrifugal switch stuck open
4 = Limit switch cycling
5 = Gas valve energized with no call for heat
6 = Wrong polarity wired to furnace
Thanks,
Robert
Flash Code:
No light = No power or open fuse
Steady green = Control has power
1 = Ignition failure
2 = Centrifugal switch shorted
3 = Centrifugal switch stuck open
4 = Limit switch cycling
5 = Gas valve energized with no call for heat
6 = Wrong polarity wired to furnace
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?