I see in the parts store the fittings for pex to pb but I need to know if you use the same crinmp tool for both type of waterline. If not where do you get a crimp tool for the poly line
. Thanks, pops
pex to poly water line
Moderators: Greg, Mark, mhrAJ333, JD
-
- Posts: 45
- Joined: Fri Aug 08, 2008 6:47 pm
Pops,
Lowes in my city has a product that is a set of one fitting and one type of each needed crimp, which might be the easiest way to buy them if you only need one or two fittings, vs getting a bag of each type of crimp. Of course, I was worried about dropping the crimp down the wall, so I bought two bags... lol
Brenda (OH)
Lowes in my city has a product that is a set of one fitting and one type of each needed crimp, which might be the easiest way to buy them if you only need one or two fittings, vs getting a bag of each type of crimp. Of course, I was worried about dropping the crimp down the wall, so I bought two bags... lol
Brenda (OH)
Hi
Here's the kit.
Use care when you assemble as the rings and adapter ends are slightly different in size.
![Image](http://mobilehomerepair.com/phpbb/userpix/35_pex_to_poly_2.jpg)
Harry
Here's the kit.
Use care when you assemble as the rings and adapter ends are slightly different in size.
![Image](http://mobilehomerepair.com/phpbb/userpix/35_pex_to_poly_2.jpg)
Harry
Aside from the roof leak, soft floors, rats, mice and bursted plumbing ........ how do you like it?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 28525 Views
-
Last post by Mark440
Tue Sep 20, 2022 2:15 pm
-
-
Bathroom subfloor water damage from toilet supply line
by Bluejayz79 » Mon Jul 23, 2018 7:29 pm » in Mobile Home Repair - 1 Replies
- 29174 Views
-
Last post by Greg
Tue Jul 24, 2018 7:20 pm
-
-
- 2 Replies
- 14944 Views
-
Last post by colddonkey
Fri Oct 11, 2019 9:48 am
-
- 5 Replies
- 37129 Views
-
Last post by Joe Freeman
Sun Jul 23, 2017 7:32 am
-
-
Frost line footers the easy way
by Jim from Canada » Fri Aug 04, 2017 8:08 am » in Mobile Home Repair - 2 Replies
- 15142 Views
-
Last post by Jim from Canada
Sat Aug 05, 2017 7:01 am
-