I did a Yahoo search for diverters and could only find industrial ones.
Since this forum specialises in HVAC, could you point me to some sources for duct diverter valves? Company names or manufacturers?
The function of the diverter valve is to reduce or shut off air flow in an HVAC duct.
Thank you.
Source For HVAC Diverter Valves
I am looking for a source, a manufacturer of home or M.H. HVAC ducting and/or accessories. I want to study diverter design and how it is made before I buy.
It could be used for either site built home or a M.H..
I bought some diverters years ago from an HVAC installer. I used them to balance flow in a site built house. They were in-line round sheet metal pipes with a sheet metal butterfly valve. approx. 8 - 10" in diameter (don't remember the exact size).
Quite frankly, they were made like junk and the control handles came loose only after a few flow tweaks.
It could be used for either site built home or a M.H..
I bought some diverters years ago from an HVAC installer. I used them to balance flow in a site built house. They were in-line round sheet metal pipes with a sheet metal butterfly valve. approx. 8 - 10" in diameter (don't remember the exact size).
Quite frankly, they were made like junk and the control handles came loose only after a few flow tweaks.
Hi,
The majority of our parts are for MH's, however none of our parts are what you're looking for.
To my knowledge, finding what you want for studying before buying would be doubtful.
Best bet would be to google search for manufacturers and contact them directly.
Thanks,
Robert
The majority of our parts are for MH's, however none of our parts are what you're looking for.
To my knowledge, finding what you want for studying before buying would be doubtful.
Best bet would be to google search for manufacturers and contact them directly.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Hi,
You're very welcome, happy to help. Google residential duct dampers or residential balancing dampers.
Here's one for example:
http://askweldin.com/Balancing.html
BTW, where are you located in Upcountry, SC ? That's where I'm from.
Thanks,
Robert
You're very welcome, happy to help. Google residential duct dampers or residential balancing dampers.
Here's one for example:
http://askweldin.com/Balancing.html
BTW, where are you located in Upcountry, SC ? That's where I'm from.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
South Greenville county, out in what's left of the 'country'.
If the economy turns around (it never will return to pre-1913 prosperity), this area will become a little Atlanta. Not good.
I will at that point, move to a more rural county.
If the economy turns around (it never will return to pre-1913 prosperity), this area will become a little Atlanta. Not good.
I will at that point, move to a more rural county.
Hi David,
I'm from Pickens and Oconee Counties, come on over, LOL. Had dual careers at one time, HVAC and Law Enforcement.
Was retired from LE on disability from an injury in Oconee County in 1997 and moved to Tennessee where my wife's family lived in '99.
Was just down there for Thanksgiving, all my family is there.
Go Tigers!!
Take care and best wishes,
Robert
I'm from Pickens and Oconee Counties, come on over, LOL. Had dual careers at one time, HVAC and Law Enforcement.
Was retired from LE on disability from an injury in Oconee County in 1997 and moved to Tennessee where my wife's family lived in '99.
Was just down there for Thanksgiving, all my family is there.
Go Tigers!!
Take care and best wishes,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Another route you can goo is to reasearch the different grill manufacturers. They will usually offer grills with "apposed blade dampers" built onto them. These to not effect the diverter direction of airflow. But they do control the volume of air.
We use the flat, round dampers like you described in the earlier post all all time. They are kinda cheap, but they do work. We get them from a local duct manufacturer here in Dallas. So that could be yet another source, if you have a sheet metal shop close to you that builds ductwork.
Jay
We use the flat, round dampers like you described in the earlier post all all time. They are kinda cheap, but they do work. We get them from a local duct manufacturer here in Dallas. So that could be yet another source, if you have a sheet metal shop close to you that builds ductwork.
Jay
If you're not living on the edge, you're taking up too much space.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Bathroom tub diverter spigot inlet size?
by loveoldtrux » Fri Mar 08, 2019 8:36 am » in Mobile Home Repair - 1 Replies
- 23102 Views
-
Last post by Greg
Fri Mar 08, 2019 4:28 pm
-
-
- 0 Replies
- 102602 Views
-
Last post by caltrop18
Tue Dec 01, 2020 3:05 pm
-
-
HVAC duct redirect - IT WORKS !
by Mark440 » Mon Jul 01, 2019 11:30 am » in All Other HVAC Questions - 0 Replies
- 30877 Views
-
Last post by Mark440
Mon Jul 01, 2019 11:30 am
-
-
-
Replacement of HVAC in Ohio Manufactured Home
by JakefromOhio » Wed Jul 10, 2019 8:03 pm » in All Other HVAC Questions - 1 Replies
- 30536 Views
-
Last post by truckinusa
Sun Jul 14, 2019 2:10 am
-
-
- 1 Replies
- 28819 Views
-
Last post by Mark440
Sat Dec 05, 2020 2:03 pm