I already had a NON-coleman service tech in and he did not know what the problem was other then to say that once the temp within the furnace reaches a certain temp it will shut off until it cools. My temp is set to 23 and it will only reach 18 ...
At this point shutting it off to try and get it to 23 is NOT working .. it will try and fire up for three times and then shut down.. flashing green code was 3 and now it is one flash ...
furnace cycling
Hi guys,
Robert, our tech here gets real busy this time of year, and more so when the temps drop like they have recently.
To get a timely reply to your post you most include all info about your units. Please read the posting tips and edit your post.
To the second poster, I am going to separate your post from this thread, this way you will get a clear answer for your problem. Although your problem is similar to the original poster you may have different furnaces ... please read the posting tips.
Yanita
Robert, our tech here gets real busy this time of year, and more so when the temps drop like they have recently.
To get a timely reply to your post you most include all info about your units. Please read the posting tips and edit your post.
To the second poster, I am going to separate your post from this thread, this way you will get a clear answer for your problem. Although your problem is similar to the original poster you may have different furnaces ... please read the posting tips.
Yanita
The difference between success and failure is who gives up first!
Need model number and explain the set to 23 and only gets to 18 statement.
What is set to 23 ?
Thanks,
Robert
What is set to 23 ?
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
DGAT Series furnace air-conditioning issue
by minnie1967 » Thu Jul 13, 2017 9:48 am » in Coleman Service & Repair - 0 Replies
- 61916 Views
-
Last post by minnie1967
Thu Jul 13, 2017 9:48 am
-
-
-
Acceptable HEAT RISE number for this 20-yr. old furnace.
by justplumducky » Tue Aug 29, 2017 5:33 pm » in Nordyne Service & Repair - 0 Replies
- 44401 Views
-
Last post by justplumducky
Tue Aug 29, 2017 5:33 pm
-
-
-
Can't get the furnace cover to go on
by nestsman » Sat Sep 30, 2017 4:53 pm » in Nordyne Service & Repair - 2 Replies
- 48448 Views
-
Last post by tkrueger
Sat May 05, 2018 9:12 pm
-
-
- 0 Replies
- 25151 Views
-
Last post by jrpells2017
Wed Nov 08, 2017 8:58 am
-
- 0 Replies
- 30578 Views
-
Last post by Carl Wofford
Sat Jan 20, 2018 6:55 pm