![Image](http://i106.photobucket.com/albums/m247/GSX_1998/othercrap/furnace1.jpg)
I did a few searches on this model and have found a few numbers that are close, but not the same. So, just to make sure nobody thought I wrote down the wrong number I just snapped a pic of it.
Walked into house with temp at 55 degrees. No light at all in the diagnostic window. Turned off breaker and turned it back on. Furnace tried to fire. Could see heater element warm up and gas ignite. As soon as the blower motor turned on the flame went out. It went threw this cycle once again and flashed code #1. Turned on and off a few times, after the 5th try the heater fired and stayed on.
It is 1:55am here in Cleveland in the aftermath of a blizzard. I work nights and even if I did call a service person my snow blower died this morning (great day) and no vehicle without 4wd could get down my 400ft driveway. So I need help.
The sticky stated that you might not sell parts or give advice to people who might not be skilled enough to take on the job. I am a Toyota Master Diagnostic Tech and also hybrid certified. I am very familiar with 600v+ DC systems and understand AC also.
I would like to order ASAP whatever parts you guys think is going to fix this problem, as this is not something that I can have happen again. I understand diagnosing stuff by post in a forum is not easy so if you think it might be one part or possibly another, I'll take them both.
I realize this post is way over the top, but I want to make sure I give as much info as possible to make this go as fast and smooth as possible. I would like to order whatever parts I might need right away.
Thank you very much in advance
Craig Miller
P.S. If you would like to call me to take order over the phone or ask question/advice, please call me at (. I'll try to answer, but I might be asleep.