![Image](http://mobilehomerepair.com/phpbb/userpix/4543_MBTRANS_069_2.jpg)
I need a new tub
Moderators: Greg, Mark, mhrAJ333, JD
-
- Posts: 17
- Joined: Sun Feb 01, 2009 11:30 pm
- Location: Albq, NM
I Googled and found the answer. Hello all. Spring is in the air and I need to do some repairs. I want to replace my tub/shower. The tub bottom has some soft spots. Is this going to be a mobile home supply item only? Tub has styrofoam bottom. Check out this drain hole cut out. tub is 27 1/4" X 54". Floor will need to be replaced also.![Image](http://mobilehomerepair.com/phpbb/userpix/4543_MBTRANS_069_2.jpg)
![Image](http://mobilehomerepair.com/phpbb/userpix/4543_MBTRANS_069_2.jpg)
If the toilet is already close to the tub and you cannot or so not want to move it, then yes, it will have to be a mobile home tub or shower pan. There needs to be a minimum distance of 15" from the center of the toilet to a tub, vanity or wall.
If you have enough space, you can get a 54x30 porcelain/steel type tub at plumbing supply stores and sometimes your big home improvement stores. If they do not have one in stock, they should be able to order one for you. I get them in my area for about $150. Being a steel tub, they are very sturdy.
John
If you have enough space, you can get a 54x30 porcelain/steel type tub at plumbing supply stores and sometimes your big home improvement stores. If they do not have one in stock, they should be able to order one for you. I get them in my area for about $150. Being a steel tub, they are very sturdy.
John
☯JD♫
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
Our Lowes stocks 1 54" fiberglass tub, around $200. With the price of shipping it would still be cheaper than ordering from MH supply co. Greg
"If I can't fix it, I can screw it up so bad no one else can either."
-
- Similar Topics
- Replies
- Views
- Last post
-
-
I need input on best way to hang new copper or pex pipes from underside mobilehome without opening up belly board
by waitingtohear » Mon Jun 11, 2018 12:21 am » in Mobile Home Repair - 7 Replies
- 89699 Views
-
Last post by waitingtohear
Mon Jul 02, 2018 5:39 pm
-
-
- 2 Replies
- 50901 Views
-
Last post by Mark440
Thu Apr 11, 2019 11:15 am
-
- 7 Replies
- 82639 Views
-
Last post by Greg
Sun Aug 13, 2017 7:59 am
-
- 4 Replies
- 9377 Views
-
Last post by cat_mobile
Tue Aug 22, 2017 5:31 pm
-
-
Bathroom tub diverter spigot inlet size?
by loveoldtrux » Fri Mar 08, 2019 8:36 am » in Mobile Home Repair - 1 Replies
- 23121 Views
-
Last post by Greg
Fri Mar 08, 2019 4:28 pm
-