originally I posted 2 pictures of the old vanity.
This looks a whole lot better.
A couple of coats of Krylon Fusion Black, $20 worth of handles makes all the difference.
I screwed up on the faux stone counter top, so I trying to rectify my screw up.
More pictures of the rest of the new shower will be along soon.
BAthroom vanity looks better now
Moderators: Greg, Mark, mhrAJ333, JD
Hey,
It still amazes me what a coat of paint can do! Looks good, my guest bath vanity is black, and soon my lower kitchen cabinets will be as well!
Yanita
It still amazes me what a coat of paint can do! Looks good, my guest bath vanity is black, and soon my lower kitchen cabinets will be as well!
Yanita
The difference between success and failure is who gives up first!
The "Rustoleum American Accents Stone Texture" went on well and really sticks over an undercoat of Glidden Gripper BUT, after putting a on number of coats of "Clear Spray" on top I left a rag on top that had Alcohol on it.
POOP, it desolved the Clear and when I wiped it off it ate right through to the undercoat.
I tried to touch it up, but it didn't exactly match.
I think I'll put a large Black soap dish over the spot for the time being.
I'm re-coating the surface with Minwax Polycrylic brush on and it is resistant to most liquids. Nice hard surface and wet sands really smooth. Polycrylic comes in a spray also.
POOP, it desolved the Clear and when I wiped it off it ate right through to the undercoat.
I tried to touch it up, but it didn't exactly match.
I think I'll put a large Black soap dish over the spot for the time being.
I'm re-coating the surface with Minwax Polycrylic brush on and it is resistant to most liquids. Nice hard surface and wet sands really smooth. Polycrylic comes in a spray also.
1987 Craftsman Double Wide 42x28,w/attached 28x12 foot enclosed porch/ re-shingled 2 yrs ago. Original exterior vinyl w/no sheathing.
OUCH. That's a shame, after all your hard work. I like the idea of the big soap dish covering it. I always tell people not to think, that where I put things, reflects my taste. There's usually a reason for things being where they are. [like hiding something]
Matt finish will show any grease spots, like finger prints etc.
another small "Ring" spot was left after my wife set a HOT cup of coffee on top. Now this was with the regular spray clear.
This Minwax Polycrylic is supposed to resist water and such.
Every couple of days I "Wet Sand" the counter top with Black 400 grit sand paper wrapped around a wood block with a Green Scotch Pad as a cushion. It sands real easy.
I find that a Foam brush spreads a little easier then a brush.
Look at all the skills we learn being poor.
another small "Ring" spot was left after my wife set a HOT cup of coffee on top. Now this was with the regular spray clear.
This Minwax Polycrylic is supposed to resist water and such.
Every couple of days I "Wet Sand" the counter top with Black 400 grit sand paper wrapped around a wood block with a Green Scotch Pad as a cushion. It sands real easy.
I find that a Foam brush spreads a little easier then a brush.
Look at all the skills we learn being poor.
1987 Craftsman Double Wide 42x28,w/attached 28x12 foot enclosed porch/ re-shingled 2 yrs ago. Original exterior vinyl w/no sheathing.
Hi,
Just wanted to comment on the minwax poly acrylic...I used it to cover the top of an antique vanity that serves as the base counter for our master bath....did this about 6 years ago and it is still holding strong.
It has endured all that it has been put through, standing water, damp face clothes, hot cups of coffee, condensation rings from cold drinks, and even a curling iron setting there, in it's proper position though.
Yanita
Just wanted to comment on the minwax poly acrylic...I used it to cover the top of an antique vanity that serves as the base counter for our master bath....did this about 6 years ago and it is still holding strong.
It has endured all that it has been put through, standing water, damp face clothes, hot cups of coffee, condensation rings from cold drinks, and even a curling iron setting there, in it's proper position though.
Yanita
The difference between success and failure is who gives up first!
While at home depot today I noticed a clear epoxy top coat kit for 20 bucks. Also lowes is carrying a tintable countertop paint?epoxy kit from rustolium it is near the quarts in the spray paint isle.
Starting over remodel junkie
-
- Similar Topics
- Replies
- Views
- Last post
-
-
In too deep to turn back now... now what?
by Do it herselfer » Thu Nov 02, 2017 11:28 pm » in Mobile Home Repair - 2 Replies
- 26384 Views
-
Last post by yakima4$
Tue Dec 05, 2017 8:29 pm
-
-
-
Removing garden tub/replacing vanity
by mrschessiepup » Thu Dec 23, 2021 7:46 pm » in Mobile Home Repair - 2 Replies
- 35736 Views
-
Last post by mrschessiepup
Sat Jan 08, 2022 9:06 pm
-
-
-
Could open crawlspace (no skirting) provide better ventilation?
by thedavidbieda » Sat Nov 20, 2021 5:51 pm » in Mobile Home Repair - 0 Replies
- 123837 Views
-
Last post by thedavidbieda
Sat Nov 20, 2021 5:51 pm
-
-
- 1 Replies
- 3904 Views
-
Last post by Norm Frechette
Mon Sep 04, 2017 5:49 am
-
- 5 Replies
- 37120 Views
-
Last post by Joe Freeman
Sun Jul 23, 2017 7:32 am