Hey Robert,
I got my new sequencer installed and have double checked the wiring. Everything looks correct but still no fan on auto while heating elements are on. Fan runs fine in the "on" position. I can hear a buzzing around the fan motor and if I spin the fan by hand it will take off on its own.
After a lot of searching through posts, I found another person with what sounded like the same problem and you recommended a run capacitor. Do you think the run cap is bad on my heater fan?
You've helped me out in private emails the last few days. When I had to search so much for a problem like mine, I thought I would post this one here to maybe help somebody else in the future.
Rob
New sequencer, still no fan E2EB-015HA
Hi Rob,
With it starting up and running when wheel is pushed, if it runs complete cycle fine, run capacitor is a good possibility.
Run Capacitor # 1499-4461 can be seen and ordered through PayPal from left side here:
http://www.mobilehomerepair.com/ColemanElec.html
Thanks,
Robert
With it starting up and running when wheel is pushed, if it runs complete cycle fine, run capacitor is a good possibility.
Run Capacitor # 1499-4461 can be seen and ordered through PayPal from left side here:
http://www.mobilehomerepair.com/ColemanElec.html
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Question about burned wiring on e2eb-015ha
by thomasclay » Thu Sep 14, 2017 5:37 pm » in Nordyne Service & Repair - 0 Replies
- 65519 Views
-
Last post by thomasclay
Thu Sep 14, 2017 5:37 pm
-
-
- 2 Replies
- 41067 Views
-
Last post by Mark440
Mon Jan 31, 2022 7:30 am
-
- 1 Replies
- 29833 Views
-
Last post by andyodham
Mon Jan 22, 2018 8:27 pm
-
- 0 Replies
- 35946 Views
-
Last post by Troydean3326
Thu Dec 13, 2018 7:17 pm
-
-
Eb15b sequencer & limit switch testing
by ferret13sj » Tue Jan 25, 2022 1:56 am » in Coleman Service & Repair - 0 Replies
- 125749 Views
-
Last post by ferret13sj
Tue Jan 25, 2022 1:56 am
-