Intertherm Model MGH-065
Pilot will not stay lit so thinking it is the thermo couple. How do I remove/replace it? I can see reach the end into the gas valve but how do I access the end by the burner to remove/reattach new one? I see I can remove small sheet metal flange where it enters the furnace - but not sure how to reach the other end. If I looked through the hinged round fire door access seems to be blocked by a metal cap plate sitting over the pilot. Would have area pro come out but he is undergoing cancer treatment right now. Thanks!
Hi,
Is there not other hvac companies in the area or other hvac techs ? Without experience and knowledge concerning this, would be best to have an hvac tech do the replacement.
Thanks,
Robert
Is there not other hvac companies in the area or other hvac techs ? Without experience and knowledge concerning this, would be best to have an hvac tech do the replacement.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Thanks, Robert. I have replaced them on home furnaces in the past, just not in a manufactured home. Thot it was worth a shot trying to figure out how to DIY. Didn't know if it meant disconnecting the gas valve from the front for access or what. Guess I'll go back to looking for someone that will "work on a trailer"
Hi,
Replacement is same process at other home furnaces.
Turn t-stat and gas valve off. Remove t-couple from gas valve and follow it to pilot burner connection and remove from there.
Carefully looking things over should show if anything needs to be removed to get to pilot burner.
IF unsure, should be able to get an hvac tech to do it .
Thanks,
Robert
Replacement is same process at other home furnaces.
Turn t-stat and gas valve off. Remove t-couple from gas valve and follow it to pilot burner connection and remove from there.
Carefully looking things over should show if anything needs to be removed to get to pilot burner.
IF unsure, should be able to get an hvac tech to do it .
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Intertherm outdoor a/c unit, blower not turning off. Model unknown rating plate is faded out.
by tkrueger » Sat May 05, 2018 8:57 pm » in Nordyne Service & Repair - 0 Replies
- 116542 Views
-
Last post by tkrueger
Sat May 05, 2018 8:57 pm
-
-
-
Nordyne model m1mb 070a bw power issue
by Combustibleink » Mon Nov 16, 2020 10:21 am » in Nordyne Service & Repair - 0 Replies
- 116203 Views
-
Last post by Combustibleink
Mon Nov 16, 2020 10:21 am
-
-
-
Evcon Heat Pump - Air Conditioner Model No. BRHS036B Making HUM Before Starting
by Dave_L » Tue Aug 29, 2023 1:26 am » in Coleman Service & Repair - 0 Replies
- 126617 Views
-
Last post by Dave_L
Tue Aug 29, 2023 1:26 am
-
-
-
Model DGAA070BDTA venting kit needed.
by spazatac » Fri May 24, 2024 11:21 am » in Coleman Service & Repair - 2 Replies
- 790 Views
-
Last post by spazatac
Mon Jun 10, 2024 3:11 pm
-
-
-
intertherm standing pilot propane burner Heat Rise of 38°F spread.
by justplumducky » Fri Aug 25, 2017 10:06 am » in Nordyne Service & Repair - 0 Replies
- 55214 Views
-
Last post by justplumducky
Fri Aug 25, 2017 10:06 am
-