Nordyne KG6RC-060C Blown Fuse
My furnace quit working last night, and I discovered that the 3A fuse on the control board was blown. I replaced the fuse and it blew again after a few seconds. Before the replacement fuse blew, the red LED indicator light blinked once. Any thoughts?
Hi,
This is what is needed for troubleshooting:
http://www.hvacpartstore.com/product_de ... cts_id=297
OR, quite a few 3A fuses. Turn power to furnace OFF.Take the wire off the R at board. Then remove wire from W.
Get a small jumper wire and connect it across R and W at board.
Restore power and see if fuse blows.
Let me know what results are.
Thanks,
Robert
This is what is needed for troubleshooting:
http://www.hvacpartstore.com/product_de ... cts_id=297
OR, quite a few 3A fuses. Turn power to furnace OFF.Take the wire off the R at board. Then remove wire from W.
Get a small jumper wire and connect it across R and W at board.
Restore power and see if fuse blows.
Let me know what results are.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Nordyne M1MB clicks 4 times when starting
by olsonlaaa » Thu Aug 24, 2017 10:54 am » in Nordyne Service & Repair - 0 Replies
- 47705 Views
-
Last post by olsonlaaa
Thu Aug 24, 2017 10:54 am
-
-
-
Help with Nordyne electronic board
by swade1991 » Thu Aug 02, 2018 12:13 pm » in Nordyne Service & Repair - 0 Replies
- 33089 Views
-
Last post by swade1991
Thu Aug 02, 2018 12:13 pm
-
-
- 2 Replies
- 25849 Views
-
Last post by Maxwell.lipphardt
Mon Feb 04, 2019 6:35 am
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 167505 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
-
Nordyne Mod. E1EH-015HA split unit/eliminate cooling?
by carolina jim » Thu Oct 24, 2019 8:33 am » in Nordyne Service & Repair - 0 Replies
- 39502 Views
-
Last post by carolina jim
Thu Oct 24, 2019 8:33 am
-