Hi guys....just had a new thermo pride furnace put in replacing the old miller. If I set the temp to 65 ....the room with the thermostat in it (the rest of the home too) goes up to 70.......too hot for me. I can't get it to stay at the temp I set it at. I didn't have this problem wiith the miller so I don't think it's a thermostat problem. This thermo pride is MUCH more powerful the the miller but I find myself having to keep adjusting the thermostat.....a REAL pain in the neck. Is there an adjustment the oil co. can make or is this the way it's going to be.?
Thanks,
Dave
Home gets too hot with new furnace
Hi Dave,
Different furnace will operate differently and at different ratings. Have you checked to see if t-stat heat anticipator setting is still correct ?
If t-stat and furnace are compatible, heat anticipator is correct and all wired correctly, it should shut off as pre-set to do so.
Thanks,
Robert
Different furnace will operate differently and at different ratings. Have you checked to see if t-stat heat anticipator setting is still correct ?
If t-stat and furnace are compatible, heat anticipator is correct and all wired correctly, it should shut off as pre-set to do so.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Posts: 8
- Joined: Thu Nov 26, 2009 4:20 pm
Robert,
Thank you very much for that info. I learn something new on this site everyday.
Dave
Thank you very much for that info. I learn something new on this site everyday.
Dave
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Intertherm standing pilot LPG burner 77 BTU IN gas valve mounting plate gets hot ( not warm).
by justplumducky » Sat Sep 09, 2017 3:34 am » in Nordyne Service & Repair - 1 Replies
- 74890 Views
-
Last post by Maxwell.lipphardt
Thu Nov 22, 2018 10:15 am
-
-
-
In too deep to turn back now... now what?
by Do it herselfer » Thu Nov 02, 2017 11:28 pm » in Mobile Home Repair - 2 Replies
- 26371 Views
-
Last post by yakima4$
Tue Dec 05, 2017 8:29 pm
-
-
-
Emergency (Aux) Heat comes on W/O being called too
by istvv4848 » Mon Oct 22, 2018 11:21 am » in Nordyne Service & Repair - 0 Replies
- 49464 Views
-
Last post by istvv4848
Mon Oct 22, 2018 11:21 am
-
-
- 0 Replies
- 25762 Views
-
Last post by Tonystark
Fri Dec 07, 2018 12:30 pm
-
- 4 Replies
- 10427 Views
-
Last post by ChuckS59
Sun May 12, 2019 9:43 am