Coleman 6806-732 thermostat question

[ispep]

Hello and thanks in advance for your input. I have a coleman 6806-732 electric furnace and am wondering if it is possible to instal a thermostat with a fan only control on it. i mainly heat with a wood stove and am windering if I can use the furnace blower to circulate the air. The thermostat is a 24v and there are 4 wires (red,green,white,and blue) run from the furnace to the thermostat. Only the red and white are hooked to anything and the green and blue are twisted together on both ends. Is this furnace capable of fan only operation?
Thanks,
Donavan

[Robert]

Hi Donovan,

Yes, you can get someone with the experience or an hvac tech to install a fan relay and wire it up.

Then install a 4 wire heat and cool t-stat and wire it up.

Then set t-stat to OFF and Fan ON.


Blower will run until you shut it off manually.


Thanks,
Robert