Hello,
First time caller (hehe)
I have a furnace in my Dbl Wide that is a nordyne,
Model MGBA-056ABFC-01
Serial MGB9405-00677
At first, The pilot would go out everytime the blower kicked on. I cleaned the Gas orifice and now the pilot stays on but the fan will only run for approx 20 seconds then shuts off. After a minute or so, it will do the same. New Thermostat and Thermocouple. Any ideas?
One lesson learned: If the Wife ain't warm, Ain't NO-ONE happy. HELP
Fan won't stay on
Hi,
Open control panel and look on back wall for two small switches, limit switch and fan switch.
Fan switch should be on the right.
When blower shuts off during cycle, place the volt meter probes across the fan switch terminals and see if you read 120vac.
IF so:
When blower starts back up, do it again and see if you now read 0vac.
Thanks,
Robert
Open control panel and look on back wall for two small switches, limit switch and fan switch.
Fan switch should be on the right.
When blower shuts off during cycle, place the volt meter probes across the fan switch terminals and see if you read 120vac.
IF so:
When blower starts back up, do it again and see if you now read 0vac.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Colman evcon presidental 7980B856 furnace will not stay on
by ezridersid » Sat Dec 21, 2019 8:52 pm » in Mobile Home Repair - 1 Replies
- 17310 Views
-
Last post by ezridersid
Sat Dec 21, 2019 9:04 pm
-
-
- 2 Replies
- 20929 Views
-
Last post by TorstenW
Tue Mar 06, 2018 1:04 am
-
-
Intertherm FEH-017HAC won't shut off
by Jetherid » Mon Dec 07, 2020 6:22 pm » in Nordyne Service & Repair - 0 Replies
- 175776 Views
-
Last post by Jetherid
Mon Dec 07, 2020 6:22 pm
-
-
- 1 Replies
- 23626 Views
-
Last post by Greg
Sun Jul 23, 2017 3:40 pm
-
- 2 Replies
- 19719 Views
-
Last post by Joe Freeman
Tue Aug 01, 2017 10:13 am