Thank's Robert for putting to better explaining for me.
Getting kinda old & slow at understanding instructions, especially those.
Kinda threw me off on the male & female connectors.
I'll give it a shot tonight,
Give me a shout when you locate a limit switch.
Have a pleasant day.
Warming up a bit here now.
Thank's
David
Intertherm unit replacement
I am a certified ford diesel tech, "Retired Now" Ford Parts Department counter man, computer consultant, repairman & programmer
Robert
Haven't got around to jumping the connectors yet cause my Wife thinks she smell's gas coming from it but I don't.
It run's continously if I leave the thermostat alone & don't lower the temps on it.
That I do not like worried if it might damage the exchanger if it hasn't already done so.
Getting a gas man out to sheck the system first.
Going to buy 2 gas detectors also.
One for each end of the house.
Al I have is 2 smoke alarms.
Should I install one gas detector close to the unit?
Have a great weekend.
David
Haven't got around to jumping the connectors yet cause my Wife thinks she smell's gas coming from it but I don't.
It run's continously if I leave the thermostat alone & don't lower the temps on it.
That I do not like worried if it might damage the exchanger if it hasn't already done so.
Getting a gas man out to sheck the system first.
Going to buy 2 gas detectors also.
One for each end of the house.
Al I have is 2 smoke alarms.
Should I install one gas detector close to the unit?
Have a great weekend.
David
I am a certified ford diesel tech, "Retired Now" Ford Parts Department counter man, computer consultant, repairman & programmer
Hi David,
Install them in any used bedrooms, living room and dining area. Try to circle the furnace area and mainly in bedroom where you sleep.
Install them about one to two feet off the floor in the outlets there .
Been really swamped and Mark and family have been away for a family funeral. Will try and look for a compatible limit when they return around Tuesday. Will need Mark to see what he has in stock
Thanks,
Robert
Install them in any used bedrooms, living room and dining area. Try to circle the furnace area and mainly in bedroom where you sleep.
Install them about one to two feet off the floor in the outlets there .
Been really swamped and Mark and family have been away for a family funeral. Will try and look for a compatible limit when they return around Tuesday. Will need Mark to see what he has in stock
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Robert:
Sorry to hear about your family delema.
Hope everyone is doing ok.
When something like that happens, things need to be put on hold for a while.
I know how it can be, I lost my son some months back myself.
All I have left in my family is my Dad.
Hang in there & My Wife & I will pray for you & your family.
I went by & talked to my friend the commercial HVAC guy & told him about my problem I was having with my unit & he agreed the Limit Switch has to be my problem if the burner is kicking on & it stays running too long without lowering the thermostat to the desired lower temps to shut it down.
He gave me a business card for a mobile home parts dealer in Barling Ark. & I will give them a call on Monday if their open for MLK's birthday & give them the part number for the switch & see also if they have one or can order one.
He said he would drop by soon to find out if it has a gas leak or not & test it with his sniffer tester.
If you like you can put the switch on hold for now & i'll give you a shout back soon to let you know if I can get one through them or not.
Your family is more important than this.
Thank's for your interest.
God Bless
David
Sorry to hear about your family delema.
Hope everyone is doing ok.
When something like that happens, things need to be put on hold for a while.
I know how it can be, I lost my son some months back myself.
All I have left in my family is my Dad.
Hang in there & My Wife & I will pray for you & your family.
I went by & talked to my friend the commercial HVAC guy & told him about my problem I was having with my unit & he agreed the Limit Switch has to be my problem if the burner is kicking on & it stays running too long without lowering the thermostat to the desired lower temps to shut it down.
He gave me a business card for a mobile home parts dealer in Barling Ark. & I will give them a call on Monday if their open for MLK's birthday & give them the part number for the switch & see also if they have one or can order one.
He said he would drop by soon to find out if it has a gas leak or not & test it with his sniffer tester.
If you like you can put the switch on hold for now & i'll give you a shout back soon to let you know if I can get one through them or not.
Your family is more important than this.
Thank's for your interest.
God Bless
David
I am a certified ford diesel tech, "Retired Now" Ford Parts Department counter man, computer consultant, repairman & programmer
Ok! I sure will.
Hope you can find me a limit switch as well.
Thank's
David
Hope you can find me a limit switch as well.
Thank's
David
I am a certified ford diesel tech, "Retired Now" Ford Parts Department counter man, computer consultant, repairman & programmer
Will look when I get caught up, so backlogged it ain't funny. Just a bad time to try and find a compatible part to replace an obsolete one.
I will though as soon as I find a hole in the ice to come up for air.
Thanks,
Robert
I will though as soon as I find a hole in the ice to come up for air.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
That's perfectly fine with me & i'll get back with you when I contact the home repair & parts site in Barling,Ark. as soon as I can get time as well to see if they can supply the limit switch.
Back & forth, so confusing these day's trying to make end's meet.
Got my first refund check & will be purchasing the 3 way fan rocker switch today.
Hope you don't run out of those too.
That's one down.
Heater has been taking a break cause the weather here has warmed up a bit in the 50's & 60's.
It's about time.
Take care & hope everything is going ok with Greg & his family.
Thank's for caring & have a great week.
David
Back & forth, so confusing these day's trying to make end's meet.
Got my first refund check & will be purchasing the 3 way fan rocker switch today.
Hope you don't run out of those too.
That's one down.
Heater has been taking a break cause the weather here has warmed up a bit in the 50's & 60's.
It's about time.
Take care & hope everything is going ok with Greg & his family.
Thank's for caring & have a great week.
David
I am a certified ford diesel tech, "Retired Now" Ford Parts Department counter man, computer consultant, repairman & programmer
Hey David,
Was asking Mark about another customer needing/waiting for a compatible limit switch due to old one being obsolete. His was same style type as yours. Mark said in about a week or so, he should have a new source who is manufacturing those old limits and we should then have them in stock and available.
Will let you know when I know.
Thanks,
Robert
Was asking Mark about another customer needing/waiting for a compatible limit switch due to old one being obsolete. His was same style type as yours. Mark said in about a week or so, he should have a new source who is manufacturing those old limits and we should then have them in stock and available.
Will let you know when I know.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Sorry! I mean't to say Marks family.
I don't know where I got Greg form.
That's fine about the switch.
Haven't had time to contact the modile home repair & sales in Barling anyway.
Been too busy fixing diesel's.
Have a great one & thank's fr your kind help.
David
I don't know where I got Greg form.
That's fine about the switch.
Haven't had time to contact the modile home repair & sales in Barling anyway.
Been too busy fixing diesel's.
Have a great one & thank's fr your kind help.
David
I am a certified ford diesel tech, "Retired Now" Ford Parts Department counter man, computer consultant, repairman & programmer
Hey David,
Mark just bought a box of 128 old Nordyne fan and limit assemblies. What is yours part number and the fan and limit temps again ?
Thanks,
Robert
Mark just bought a box of 128 old Nordyne fan and limit assemblies. What is yours part number and the fan and limit temps again ?
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Hey! Great
Fan switch # is 6262920
Limit temps:L130-15F201475
Fan temps:F110-20F-312675T
At the top of the small switches is says for the limit & Fan:60T02.
Hope this helps.
Thanks'!
Fan switch # is 6262920
Limit temps:L130-15F201475
Fan temps:F110-20F-312675T
At the top of the small switches is says for the limit & Fan:60T02.
Hope this helps.
Thanks'!
I am a certified ford diesel tech, "Retired Now" Ford Parts Department counter man, computer consultant, repairman & programmer
Hi David,
Yours has been replaced with 626235 . Mark only had one of those in the box of assemblies and I sold it before I knew yours had been replaced by that part number.
He will have more in about a week though.
They will be the whole assembly, you can't just replace the switches.
It will be $99.00 + $8.00 shipping if interested.
Thanks,
Robert
Yours has been replaced with 626235 . Mark only had one of those in the box of assemblies and I sold it before I knew yours had been replaced by that part number.
He will have more in about a week though.
They will be the whole assembly, you can't just replace the switches.
It will be $99.00 + $8.00 shipping if interested.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Hi David,
Just a FYI in case this is who you are going to contact :
http://maps.google.com/maps/place?clien ... 6219377697
Thanks,
Robert
Just a FYI in case this is who you are going to contact :
http://maps.google.com/maps/place?clien ... 6219377697
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Yep that's them allright.
Dang! I missed out on that switch.
Haven't had any time to contact them, been so busy at work.
Heater has been working somewhat better not cycling repeatadly.
Can't really trust it, especially the bad weather were going to get Thur's night into Fri. morning.
Ran changing to freezing rain & then snow the day after.
Been staying warm though as long as the furnuce keeps working.
Appreciate you trying to locate me a switch assy.
The one you spoke of, what does it exist of.
Is the other number it changed over to that you gave me in the part's list at your site?
Thank's for helping me out.
Dang! I missed out on that switch.
Haven't had any time to contact them, been so busy at work.
Heater has been working somewhat better not cycling repeatadly.
Can't really trust it, especially the bad weather were going to get Thur's night into Fri. morning.
Ran changing to freezing rain & then snow the day after.
Been staying warm though as long as the furnuce keeps working.
Appreciate you trying to locate me a switch assy.
The one you spoke of, what does it exist of.
Is the other number it changed over to that you gave me in the part's list at your site?
Thank's for helping me out.
I am a certified ford diesel tech, "Retired Now" Ford Parts Department counter man, computer consultant, repairman & programmer
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Intertherm outdoor a/c unit, blower not turning off. Model unknown rating plate is faded out.
by tkrueger » Sat May 05, 2018 8:57 pm » in Nordyne Service & Repair - 0 Replies
- 116542 Views
-
Last post by tkrueger
Sat May 05, 2018 8:57 pm
-
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 167503 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
-
G.E.supplemental coil heater in wall unit
by stevenbrooks » Mon Jul 17, 2017 4:00 pm » in Service & Repair of Other Brands - 0 Replies
- 38679 Views
-
Last post by stevenbrooks
Mon Jul 17, 2017 4:00 pm
-
-
-
Nordyne Mod. E1EH-015HA split unit/eliminate cooling?
by carolina jim » Thu Oct 24, 2019 8:33 am » in Nordyne Service & Repair - 0 Replies
- 39502 Views
-
Last post by carolina jim
Thu Oct 24, 2019 8:33 am
-
-
-
Unit Starts then Stops - Ignition Failure
by Arkady78 » Wed Dec 02, 2020 9:58 am » in Coleman Service & Repair - 0 Replies
- 104784 Views
-
Last post by Arkady78
Wed Dec 02, 2020 9:58 am
-