coleman 3400a816
my furnace has been acting up for a few days now, the elements are not kicking off. i have replaced the limit switches and sequencer. the limits i purchased from this site, the sequencer was given to me by a friend. not sure if it is new or used but it will control up to 4 elements, where my furnace only has three. i have checked the wiring of the sequencer and all seems correct. do i need to get the correct sequencer or is the old thermostat to blame? also sometimes the lights dim slightly when the limits kick on and off. should i keep the fan running to prevent damage to the elements until i can fix it? any info would be helpful.
Hi,
The correct Sequencer # 3115 - 3571 can be seen and ordered through PayPal
from this page : http://www.mobilehomerepair.com/ColemanElec.html
I don't have any info on sequencer you have. Do not run elements without blower being on.
Thanks,
Robert
The correct Sequencer # 3115 - 3571 can be seen and ordered through PayPal
from this page : http://www.mobilehomerepair.com/ColemanElec.html
I don't have any info on sequencer you have. Do not run elements without blower being on.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Put an Ammeter on the power legs to element s and see what the amp draw is when energized.
Then compare to nameplate/data sticker info.
Thanks,
Robert
Then compare to nameplate/data sticker info.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 60302 Views
-
Last post by jazsimpson
Sat Jul 08, 2017 8:16 am
-
- 0 Replies
- 57574 Views
-
Last post by Montanan
Wed Jan 03, 2018 1:03 pm
-
- 0 Replies
- 50111 Views
-
Last post by Kourgath
Fri Mar 23, 2018 3:41 pm
-
-
LOUD Blower on Coleman Presidential 2 900759
by AuntKatie » Thu Apr 05, 2018 6:50 pm » in Coleman Service & Repair - 0 Replies
- 44830 Views
-
Last post by AuntKatie
Thu Apr 05, 2018 6:50 pm
-
-
-
Eb12eb Coleman furnace 4 speed help.
by Johnwayne892000 » Thu Aug 30, 2018 7:37 pm » in Coleman Service & Repair - 0 Replies
- 24988 Views
-
Last post by Johnwayne892000
Thu Aug 30, 2018 7:37 pm
-