Strange situation. My furnace will being its cycle and the pressure switch will flash "open". Thinking it was the switch, I have replaced 4 of them. The last time the switch indicated "open", I jiggled the terminal lead and the light was solid and the furnace fired. I had the leads professionally replaced but it did not fix the issue.
What other items should I be looking for? As I stated, the switch flashes open but will go to normal if I reposition the leads. I furnace will cycle a few times normally but will eventually return to the open position. Very frustrating.
Any info would be appreciated.
Miller Model M1MB 070ABW Serial # M1D021003824
Miller M1MB 070ABW Pressure Switch Open
Hi,
Test both terminals to ground for 24vac, should have it on one for entire cycle.
Be sure tubes are tight, not kinked and unclogged.
Be sure air pipe to combustion motor is clear.
Be sure motor is running strong and smooth and motor and wheel are clean.
Thanks,
Robert
Test both terminals to ground for 24vac, should have it on one for entire cycle.
Be sure tubes are tight, not kinked and unclogged.
Be sure air pipe to combustion motor is clear.
Be sure motor is running strong and smooth and motor and wheel are clean.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 16212 Views
-
Last post by mdnagel
Tue Nov 07, 2017 2:37 am
-
-
Skirt vents. Should they be open all year ?
by JustRayInWi » Sat Sep 12, 2020 4:40 pm » in Mobile Home Repair - 4 Replies
- 16159 Views
-
Last post by JustRayInWi
Mon Oct 12, 2020 2:23 pm
-
-
-
Could open crawlspace (no skirting) provide better ventilation?
by thedavidbieda » Sat Nov 20, 2021 5:51 pm » in Mobile Home Repair - 0 Replies
- 123889 Views
-
Last post by thedavidbieda
Sat Nov 20, 2021 5:51 pm
-
-
-
Nordyne M1MB clicks 4 times when starting
by olsonlaaa » Thu Aug 24, 2017 10:54 am » in Nordyne Service & Repair - 0 Replies
- 47707 Views
-
Last post by olsonlaaa
Thu Aug 24, 2017 10:54 am
-
-
-
Nordyne model m1mb 070a bw power issue
by Combustibleink » Mon Nov 16, 2020 10:21 am » in Nordyne Service & Repair - 0 Replies
- 116209 Views
-
Last post by Combustibleink
Mon Nov 16, 2020 10:21 am
-