Hi,
Yes it needs to be cleaned every year. Brush up and down, not across.
Can't say if there is any liquid getting back to compressor or not and no there is nothing to prevent it.
IF t-stat is set to auto, inside blower and outside condenser should come on and off together.
May be a good idea to call an hvac tech.
Thanks,
Robert
Outside units stops, inside unit doesn't
No Coleman dealers in my area. Any ideas how to find someone who knows these units in my area? zip code = 28033. Coleman customer service gave me the phone #s for distributors in Charlotte and I'll try them. Or does it really matter? It sounds like we have a mystery on our hands.
Also, is it customary for a tech to charge for a call each time they come out - even if they can't diagnose the problem? Don't mind paying, but if it isn't acting up when he gets there i hate to keep paying ~ $100 / visit for basically nothing.
Also, is it customary for a tech to charge for a call each time they come out - even if they can't diagnose the problem? Don't mind paying, but if it isn't acting up when he gets there i hate to keep paying ~ $100 / visit for basically nothing.
Hi,
Don't have any info about local hvac techs in that area. Any good knowledgeable hvac tech should be able to resolve the issue. From what you've stated, I don't believe there is much of a problem IF you get an hvac tech that is experienced and knows what he/she is doing.
Yes, every time they come out, you'll be charged, which is a good reason to find a good hvac tech.
Thanks,
Robert
Don't have any info about local hvac techs in that area. Any good knowledgeable hvac tech should be able to resolve the issue. From what you've stated, I don't believe there is much of a problem IF you get an hvac tech that is experienced and knows what he/she is doing.
Yes, every time they come out, you'll be charged, which is a good reason to find a good hvac tech.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
talked to a tech at a coleman distributor. he recommended a service tech to me. when i described the problem he asked if there was a high pressure switch in the outside unit. i don't have a diagram that shows that part of it. would you know if there is one?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Unit Starts then Stops - Ignition Failure
by Arkady78 » Wed Dec 02, 2020 9:58 am » in Coleman Service & Repair - 0 Replies
- 104773 Views
-
Last post by Arkady78
Wed Dec 02, 2020 9:58 am
-
-
-
Coleman 6806a furnace doesn't stop heating even with tstat disconnected. Any ideas?
by Neighbor Bill » Mon Dec 31, 2018 1:01 pm » in Coleman Service & Repair - 1 Replies
- 41744 Views
-
Last post by Neighbor Bill
Mon Dec 31, 2018 1:06 pm
-
-
- 3 Replies
- 37403 Views
-
Last post by David DeBord
Sun Oct 22, 2017 8:16 am
-
- 15 Replies
- 110706 Views
-
Last post by Greg
Tue Mar 19, 2019 5:32 pm
-
- 2 Replies
- 25990 Views
-
Last post by Mark440
Tue Mar 03, 2020 8:35 pm