Coleman EB20B Furnace - Blower not working
Blower was working when I first looked at my new home. Upon purchase the thermostat was turned all the way up and probably had been for about a month. Now the blower does not work. I have reset all breakers to no avail. Have troubleshooted the thermostat but it is not the problem. What else should I be looking at? Thanks in advance.
Hi,
Sequencer and fan relay for heating and fan relay for cooling.
Seq. controls blower for heat, but it runs through relay.
Relay controls it for cooling.
Also look for loose wire connections at those and at the molex connector plugs and/or any wire nutted connections.
Thanks,
Robert
Sequencer and fan relay for heating and fan relay for cooling.
Seq. controls blower for heat, but it runs through relay.
Relay controls it for cooling.
Also look for loose wire connections at those and at the molex connector plugs and/or any wire nutted connections.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 167398 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
- 1 Replies
- 39246 Views
-
Last post by Greg
Fri Apr 20, 2018 5:11 pm
-
-
Intertherm outdoor a/c unit, blower not turning off. Model unknown rating plate is faded out.
by tkrueger » Sat May 05, 2018 8:57 pm » in Nordyne Service & Repair - 0 Replies
- 116448 Views
-
Last post by tkrueger
Sat May 05, 2018 8:57 pm
-
-
- 2 Replies
- 27495 Views
-
Last post by plumducky
Tue Dec 10, 2019 3:59 pm
-
- 0 Replies
- 32628 Views
-
Last post by clsmatHH
Wed Oct 16, 2019 12:43 pm