Coleman Presidential III
Model:7975-856
Serial: 028866514
Burner flame is more yellow than blue. I assume it needs cleaning and/or adjustment. I've been reading online about how to adjust, but don't know where to find adjustment.
It's my understanding that there is a gas pressure adjustment and an air shutter adjustment. I'm only looking to adjust the air shutter, if that's correct.
Gas valve model is 36C67 Type 175
Thx so much for any help.
location of burner flame adjustment
Hi,
Due to safety issues involved here if not done correctly, this is not a recommended DIY type task.
Call an hvac tech to correct the issue. You can inspect the roof jack as that is a top suspect here.
Thanks,
Robert
Due to safety issues involved here if not done correctly, this is not a recommended DIY type task.
Call an hvac tech to correct the issue. You can inspect the roof jack as that is a top suspect here.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Posts: 48
- Joined: Mon May 31, 2010 12:32 pm
Okay - and would a blocked air filter and/or dirty burner cause this problem also, or at least contribute?
Thx for getting back today.
Thx for getting back today.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3 Replies
- 17030 Views
-
Last post by Greg
Sat Dec 22, 2018 10:05 am
-
-
Need advice regarding a heat\AC register location
by JustRayInWi » Mon Aug 24, 2020 8:49 pm » in Mobile Home Repair - 2 Replies
- 18295 Views
-
Last post by JustRayInWi
Thu Aug 27, 2020 3:38 pm
-
-
-
intertherm standing pilot propane burner Heat Rise of 38°F spread.
by justplumducky » Fri Aug 25, 2017 10:06 am » in Nordyne Service & Repair - 0 Replies
- 55119 Views
-
Last post by justplumducky
Fri Aug 25, 2017 10:06 am
-
-
-
Intertherm standing pilot LPG burner 77 BTU IN gas valve mounting plate gets hot ( not warm).
by justplumducky » Sat Sep 09, 2017 3:34 am » in Nordyne Service & Repair - 1 Replies
- 74893 Views
-
Last post by Maxwell.lipphardt
Thu Nov 22, 2018 10:15 am
-
-
- 2 Replies
- 20919 Views
-
Last post by TorstenW
Tue Mar 06, 2018 1:04 am