I have a heat only electric furnace make by Coleman Presidential 6806A732. It has a 30 amp breaker and a 60 amp breaker. One of the black wires from the 60 amp breaker to the first on sequencer had the insulation starting to melt on both the breaker connection and the sequencer connection. The 60 amp breaker would trip after the furnace had run for about five minutes. I had salvaged some wires from some coleman furnaces that had been discarded and replaced my bad one with one of them. My breaker no longer trips. I would like to buy new wires from you but I can not find the wire size in my Coleman manual nor are there any numbers printed on the existing wires in this furnace except on the smallerwires to and from the blower relay. Is the correct guage of wire from the breaker to the sequencer 10AWG and from the sequencer to the limit switch also 10AWG?
Thanks in advance for any clarification you can give me.
Sean Bean
Coleman Presidential 6806A732 sequencer wire guage
Hi,
Can be 10, 12 or 14 gauge, usually a mixture. I prefer 10 myself and that is what I mostly use. Other times I use 12awg.
Go here to see and order wire:
http://www.aberdeenhomerepair.com/store ... esults.php
Page down a little ways to see red and black 10awg wire.
Thanks,
Robert
Can be 10, 12 or 14 gauge, usually a mixture. I prefer 10 myself and that is what I mostly use. Other times I use 12awg.
Go here to see and order wire:
http://www.aberdeenhomerepair.com/store ... esults.php
Page down a little ways to see red and black 10awg wire.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 16927 Views
-
Last post by Norm Frechette
Tue Mar 17, 2020 8:30 am
-
-
Nordyne M1B1 furnace issue - thermostat c wire not hooked up correctly. It's running off atteries instead
by Tallestt » Mon Apr 20, 2020 6:27 am » in Nordyne Service & Repair - 1 Replies
- 43347 Views
-
Last post by taurolyon
Tue Jun 23, 2020 4:02 pm
-
-
- 1 Replies
- 29779 Views
-
Last post by andyodham
Mon Jan 22, 2018 8:27 pm
-
- 0 Replies
- 35892 Views
-
Last post by Troydean3326
Thu Dec 13, 2018 7:17 pm
-
-
Eb15b sequencer & limit switch testing
by ferret13sj » Tue Jan 25, 2022 1:56 am » in Coleman Service & Repair - 0 Replies
- 125671 Views
-
Last post by ferret13sj
Tue Jan 25, 2022 1:56 am
-