coleman/evcon DGAT 070BDC Blower wont come on
A few days ago my blower would not turn off. I flipped the breaker off then on and it stopped. I didnt need AC again til today. Now the outside unit comes on but the blower doesnt. It clicks every 10 seconds or so pretty hard at the control board. The fan blades also barley twitch, Almost un noticable when it does it. I have spun the blades while its clicking and it doesnt affect it at all.
Hi,
Does the blower not work when the thermostat is calling for heat? Or does it not work only when the thermostat is calling for the a/c to turn on? This will help to figure out what is going on. Thanks Bill
Does the blower not work when the thermostat is calling for heat? Or does it not work only when the thermostat is calling for the a/c to turn on? This will help to figure out what is going on. Thanks Bill
Please remember to check and change your filters.
When the thermostat clicks the heat on , the furnace gives a click also at the same time, But there is no reaction after that, no lighting up, no combustion air, just silence. The heat was on the day it didnt stop running and I turned it off with the breaker. When I switch it too AC the outside unit comes on instantly and the switch board area on the furnace hard clicks every 15 seconds or so from the circuit board area. Also when fan is in the "on" position. When it clicks loudly the green light flashes off with it for a split second.
Hi,
First thing I would like to try is resetting the Manual reset limit switch. It is located in the upper 1/3 of the furnace and is to the left of the blower. See if you can reset the switch and if that fixes things.
Bill
First thing I would like to try is resetting the Manual reset limit switch. It is located in the upper 1/3 of the furnace and is to the left of the blower. See if you can reset the switch and if that fixes things.
Bill
Please remember to check and change your filters.
Hi,
It sounds to me like its the circuit board is just not working right. Here is a link where you can get a new one. They will also test the old one for you to make sure that is what is wrong.
http://www.aberdeenhomerepair.com/store ... ion-module
Bill
It sounds to me like its the circuit board is just not working right. Here is a link where you can get a new one. They will also test the old one for you to make sure that is what is wrong.
http://www.aberdeenhomerepair.com/store ... ion-module
Bill
Please remember to check and change your filters.
Ok, I sent the board into repair. Now I have a new problem. I took detailed pictures with my Iphone of what colored wires went where. It would have been easy to put it back like it was, yesterday my Iphone broke and I got a new phone and lost the pictures, Now I have no way to know what went where!
-
- Similar Topics
- Replies
- Views
- Last post
-
-
DGAT Series furnace air-conditioning issue
by minnie1967 » Thu Jul 13, 2017 9:48 am » in Coleman Service & Repair - 0 Replies
- 61916 Views
-
Last post by minnie1967
Thu Jul 13, 2017 9:48 am
-
-
-
Eb15a elec furnace will only come on if jumpered at themostat
by redcat31 » Wed Jan 31, 2018 6:18 pm » in Service & Repair of Other Brands - 0 Replies
- 23401 Views
-
Last post by redcat31
Sat Feb 03, 2018 1:20 am
-
-
- 2 Replies
- 20919 Views
-
Last post by TorstenW
Tue Mar 06, 2018 1:04 am
-
-
3500A816 Randomly wont start or shut down
by Smithcraft » Fri Jan 13, 2023 4:04 pm » in Coleman Service & Repair - 0 Replies
- 95141 Views
-
Last post by Smithcraft
Fri Jan 13, 2023 4:04 pm
-
-
- 0 Replies
- 110046 Views
-
Last post by cwwhite75
Sat Feb 29, 2020 8:46 am