Hello all I have a few small screw holes from the satalite mount that was on the eve of my house. How would you patch the small holes? The house has what I would call a "Fiberboard"?? it looks like wood but if you drill into it it looks like its made with a fiber composit type material.
Is it ok to just use wood puddy and sand? or what will hold up is my question I guess???????
Thanks in advance!!!!!!
Patching fiberboard ext??
Moderators: Greg, Mark, mhrAJ333, JD
- flcruising
- Posts: 606
- Joined: Mon Dec 03, 2007 2:18 pm
- Location: Florida Panhandle
If it is fiber cement board (commonly know as Hardieplank) then all I did was fill the holes with my favorite caulk - White Lightening. Depending on the size of the holes it may take 2 applications because it will shrink as it dries.
[color=blue]Aaron[/color]
Sounds like thats what I will do. It is on the eve anyway so i doubt anyone will see it once I paint the house. but thats next years job the 3500 I spent on the roof has put a cramp on the money for projects this yearGreg wrote:I would go with a good Silicone caulk also, If you can find a color that is close. Or a paintable caulk if you have to go that route.
Greg
-
- Similar Topics
- Replies
- Views
- Last post
-
- 9 Replies
- 12182 Views
-
Last post by Greg
Sat Oct 20, 2018 9:01 am