Hi
I have a Coleman Evcon Furnace. Model DGAT070BDD.
I turn my heat down at night and in the morning when the temp goes back up I get the limit cycling code. It will turn on then off then on and so on till it completely stops with the limit cycling code. It does not always just do it in the morning. Sometimes it will just do it during the day when its just keeping the temp at 70. I've tried to turn the fan on using the thermostat with the heat/cool switch set to off to see if the fan will trip the limit cycling by itself and the fan does not turn on. Any help would be great... Thanks for your help
Coleman evcon DGAT070BDD Limit Cycling
You possibly have a limit switch tripping prematurely. Or excess heat is building up inside the furnace due to possible factors like the motor no longer spinning fast enough, or clogged filters.
Mark
Mark
You can't fail if you don't try!
OK..ill try replacing the limit switch first (although I think it might be the motor, It doesent blow very hard anymore, but ill try the cheap route first) ...my wiring diagram says there's 2 limit switches but I only see one so ill try that one then move on to the motor if that doesn't work, unless there is 2 of them you know of. Thanks for your Help Mark
-
- Posts: 1
- Joined: Mon Jan 16, 2012 10:20 am
Hello bryce2843. May I ask what your final diagnosis was for the problem that you described above? My Coleman furnace DGAA090BDTA has a similar problem where it cycles on/off multiple times when I turn it up in the morning, and eventually goes completely off with the four flashes. Funny thing is, it seems to work just fine if I leave the front panel off. I have already replaced both limit switches, pressure switch, and filters, and have cleaned all dust off of the furnace door.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
EB15B Limit switch part # help
by ferret13sj » Thu Jan 18, 2018 11:46 pm » in Coleman Service & Repair - 0 Replies
- 48084 Views
-
Last post by ferret13sj
Thu Jan 18, 2018 11:46 pm
-
-
- 0 Replies
- 45068 Views
-
Last post by Darts318
Sun Nov 03, 2019 7:00 pm
-
- 0 Replies
- 65431 Views
-
Last post by Chevy357
Wed Nov 13, 2019 7:47 pm
-
-
Eb15b sequencer & limit switch testing
by ferret13sj » Tue Jan 25, 2022 1:56 am » in Coleman Service & Repair - 0 Replies
- 125661 Views
-
Last post by ferret13sj
Tue Jan 25, 2022 1:56 am
-
-
- 0 Replies
- 110036 Views
-
Last post by cwwhite75
Sat Feb 29, 2020 8:46 am