exterior door
Moderators: Greg, Mark, mhrAJ333, JD
does anyone know of anyone who sells exterior doors that actually fit a mobile home? I have found a few online but they are so high! They seem to be way higher than the ones at Lowe's and I was just wondering if anyone has had any luck finding an affordable door that fits.
Hi
Do you have Mark's Repair Manual? Doors is covered in Chapter 7.
Usually a conventional door requires some carpentry work....but a lot of folks take that route.
As for doors that fit have you tryed: http://store.ashvillemobilehomes.com/doors.html
Harry
Do you have Mark's Repair Manual? Doors is covered in Chapter 7.
Usually a conventional door requires some carpentry work....but a lot of folks take that route.
As for doors that fit have you tryed: http://store.ashvillemobilehomes.com/doors.html
Harry
Aside from the roof leak, soft floors, rats, mice and bursted plumbing ........ how do you like it?
Hi Texas,
Welcome to the site.
Unfortunately about anywhere you go MH doors are always going to cost more than traditional doors. In my opinion they are worth about nothing.
Most folks when faced with replacing a door go with the traditional doors. This will mean some minor carpentry skills. But there are several factors that will need to be met. If you are interested in replacing with a traditional door let us know and we will give more specifics.
You can also do a search here on site about door replacements, there are many of them....
~Yanita~
Welcome to the site.
Unfortunately about anywhere you go MH doors are always going to cost more than traditional doors. In my opinion they are worth about nothing.
Most folks when faced with replacing a door go with the traditional doors. This will mean some minor carpentry skills. But there are several factors that will need to be met. If you are interested in replacing with a traditional door let us know and we will give more specifics.
You can also do a search here on site about door replacements, there are many of them....
~Yanita~
The difference between success and failure is who gives up first!
In my area, a mobile home door will cost about 2 and a half times more than a regular stick built door.
We replaced an old metal, out swing door with a nice traditional little door door from Lowes a few years ago. Cost of the door was about $118.00, 2x4's for framing, trim and lock sets might have added another $60.00 to that.
We had to make the rough opening both wider and taller. It was a bit scary taking the recip saw and actually cutting into the house, but it all turned out better then expected.
To replace the old door would have cost over $300.00, a few years ago. It still would have been an out swing door, pretty flimsy construction. We now have a steel door, that swings in. Better construction, as it's steel, much more secure. It not only gives a bit more security, but it also much more energy efficient!
Maureen
We replaced an old metal, out swing door with a nice traditional little door door from Lowes a few years ago. Cost of the door was about $118.00, 2x4's for framing, trim and lock sets might have added another $60.00 to that.
We had to make the rough opening both wider and taller. It was a bit scary taking the recip saw and actually cutting into the house, but it all turned out better then expected.
To replace the old door would have cost over $300.00, a few years ago. It still would have been an out swing door, pretty flimsy construction. We now have a steel door, that swings in. Better construction, as it's steel, much more secure. It not only gives a bit more security, but it also much more energy efficient!
Maureen
Never discourage anyone...who continually makes progress, no matter how slow.
'Plato'
'Plato'
My back door is shot! This winter, there was at least an inch of ice buildup on the INSIDE of it and it leaked cold air and moisture like crazy! I had a blanket over it all winter which was a real pain. I was thinking that since this door leads to the deck, I would have someone build me sort of like an entryway on the deck which would serve to stop the cold air from coming in so bad. But, maybe I would be better off to just have someone install a traditional door which would solve the bent frame problem and all. What do you think?
Hi BusyBee,
Do yourself a big favor and install a regular door there!
All the big home stores have simple little doors that work well on sale right now. They are all inswing doors, so make sure you have that clearance inside.
At most it will take some modifications and a days work. The end result is well worth the effort though!
We replaced our old mobile door almost 2 years ago. It's been through 2 Winters and has held up great!
For the less experienced, it's at least a two man job!
Maureen
Do yourself a big favor and install a regular door there!
All the big home stores have simple little doors that work well on sale right now. They are all inswing doors, so make sure you have that clearance inside.
At most it will take some modifications and a days work. The end result is well worth the effort though!
We replaced our old mobile door almost 2 years ago. It's been through 2 Winters and has held up great!
For the less experienced, it's at least a two man job!
Maureen
Never discourage anyone...who continually makes progress, no matter how slow.
'Plato'
'Plato'
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 16280 Views
-
Last post by JenniferK
Fri Nov 24, 2017 1:55 am
-
- 0 Replies
- 12507 Views
-
Last post by ub1ir12dmd
Wed Apr 25, 2018 8:04 pm
-
-
how do I replace a front door with built in storm door?
by truckinusa » Thu Oct 18, 2018 9:30 pm » in Mobile Home Repair - 0 Replies
- 35887 Views
-
Last post by truckinusa
Thu Oct 18, 2018 9:30 pm
-
-
-
What's the difference between regular door knobs and mobile home door knobs?
by NurseWizzle » Fri Aug 16, 2019 6:55 pm » in Mobile Home Repair - 1 Replies
- 56473 Views
-
Last post by MelissaD
Wed Jan 04, 2023 12:02 pm
-
-
-
Is it possible to remove a portion of an exterior wall?
by Lil Haus » Wed Feb 28, 2018 8:51 pm » in Mobile Home Repair - 5 Replies
- 15321 Views
-
Last post by Greg
Mon Mar 05, 2018 5:57 pm
-