![Very Happy :D](./images/smilies/icon_biggrin.gif)
My moblehome is a 16x60 & the Kitchen has an island with the gas stove & a one piece counter with the curved bar & a double sink.
The curved bar is part of the center island.
I need to know how to remove the center island & the counter.
I am well aware of the safety precautions of messing with gas when removing the gas line & stove.
It has a shut off valve right behind the stove.
I cannot see any screws or braces that attaches the counter or center island to the wall or floor.
A carpenter friend of mine told me the style I have may have to be completely torn apart & replaced with a new one.
He has not actually seen it in person, so how would he know.
The reason I need to remove them is in the lower sink area a while back developed a small leak at one of the old stye grey plastic poly lines going up to the handle valve on the hot side (which by the way I already repaired the leak) & didn't catch it in time & it damaged the existing floor.
The floor is that particle board type that swells up real bad.
I know for a fact there's mold under there.
The only thing thats holding it all up is some floor laminate board I installed some year's back.
I would upload some pictures but have never had the success of doing so for quite some time over the years.
Says the image is too large & does not support your settings.
I need assistance for both the image upload & the floor replacement tip's so I can get right on the project before the floor collapses on my wife & I.
Thank's!
Brent