My mom gave me a 84 model trailer that needs completely remodeled. I am doing the work basicaly my self.. and have general knowelege of some stuff. Upon ripping the subflooring out I noticed that the Bottom Sill is out. This Trailer at one end sits VERY Close to the ground. I am attaching Pics if I can.
I have removed some of the metal siding off the back side of the trailer to expose the bottom sill. The Trailer is 14 x 70 and I would say the sill is gone in about 50% of the Trailer. The backside that I have pics of is the worse. My Questions is now that I have the floor ripped up and the sill cleaned out how to I go about replacing and making sure things are Somewhat level. I know the TRAILER its self is unlevel because the end I am working on is about a 1 inch off in the bedroom.
I need this Trailer to be some what liveable for the next 5 years while I save for a new one.
I dont have a huge budget to replace floors sills and walls coverings.. just 3K so any advice you give me would be helpful.
![Image](http://i604.photobucket.com/albums/tt122/Helloitsme21/House/mms_img37204.jpg)
![Image](http://i604.photobucket.com/albums/tt122/Helloitsme21/House/mms_img37200.jpg)
![Image](http://i604.photobucket.com/albums/tt122/Helloitsme21/House/mms_img37192.jpg)
![Image](http://i604.photobucket.com/albums/tt122/Helloitsme21/House/mms_img37188.jpg)
![Image](http://i604.photobucket.com/albums/tt122/Helloitsme21/House/House.jpg)
![Image](http://i604.photobucket.com/albums/tt122/Helloitsme21/House/mms_img37218.jpg)