So here are my questions. From prior posts I believe I need to scrape off the bad old seal. I don't have a grinder like JD suggests using so is there another way to do this? Would an electric drill bit a scraping attachment work? The J channel/gutter has lots of loose and missing screw that are letting water in when the stupid gutter gets clogged. Should I use bigger screws like the rubber washer screws used on corrugated metal to fix this? Also, since the gutter is really worthless can I just bend it over so it doesn't clog up?
If you have any others thoughts on what I should do after looking at the pictures I would really appreciate any comments since I'd much rather be fishing than working on the roof and don't want to have to worry about this again or at least for a long time.
Thanks for any and all comments.
![Image](http://mobilehomerepair.com/phpbb/userpix/568_Roof_1_1.jpg)
![Image](http://mobilehomerepair.com/phpbb/userpix/568_Roof_2_1.jpg)
![Image](http://mobilehomerepair.com/phpbb/userpix/568_Roof_4_1.jpg)